Download manual or user guide for the product:
WHIRLPOOL AWZ 8465 WP - Clothes dryer


On this page you can get: Clothes dryer WHIRLPOOL AWZ 8465 WP manual - is available for free download. All information such as file size, preview picture, category manual, model and more, you can find below.

After downloading the file, save it in safe place for example in "My documents" or "Desktop" folder. Pdf file can be able to view any time also in "offline state" (without internet connection).
We hope, that this document of instructions for use will help you.
PDF Download manual now - for free Clothes dryer WHIRLPOOL AWZ 8465 WP
Click to preview
Clothes dryer WHIRLPOOL AWZ 8465 WP Clothes dryer WHIRLPOOL AWZ 8465 WP

If this file was helpful.
Please click here:

Size of file: 371 KB (format file is in: pdf)
Preview instructions for use
CONTENTS
QUICK REFERENCE GUIDE PROGRAMME CHART
PREPARING THE LAUNDRY
SELECTING A PROGRAMME AND OPTIONS
STARTING AND COMPLETING A PROGRAMME
CHANGING A PROGRAMME
INTERRUPTING A PROGRAMME
DAILY MAINTENANCE AND CLEANING
INSTRUCTIONS FOR USE
BOOKLET
SAFETY ADVICES BEFORE USING THE
DRYER / CONNECTIONS
PAGE 36
ELECTRICAL CONNECTION SAFETY ADVICES AND GENERAL RECOMMENDATIONS
PAGE 37
PAGE 38
DESCRIPTION OF THE DRYER
REMINDER - MAINTENANCE AND CLEANING DRAINAGE SYSTEM
DOOR REVERSIBILITY / CHILD SAFETY LOCK HEAT EXCHANGER
TROUBLESHOOTING GUIDE /
AFTER-SALES SERVICE
PAGE 39 PAGE 39 PAGE 40 PAGE 41 PAGE 42
PAGE 43
35

========1========

SAFETY ADVICES BEFORE USING THE DRYER / CONNECTIONS
1. Removing the packaging and check Stability:
• After unpacking, make sure that the dryer is When installing the dryer always carefully level the
undamaged. If in doubt, do not use the dryer. dryer adjusting the four feet and check the correct
Contact After-Sales Service or your local retailer. levelling with a spirit level.
 If the appliance was exposed to the cold prior to To built in the dryer
delivery, keep it at room temperature for a few Remove the work-top and replace it with the Built-
hours before operating. In kit (according to Eec Electrical Regulations),  Keep the packaging materials (plastic bags, available at your dealer. As prescribed by law, only
polystyrene parts, etc.) out of reach of children, as a qualified technician has to do the installation.
they are potentially dangerous. Stacking kit
 Remove the protective foil from the control panel. Depending on the model, your dryer can be 2. Electrical Connections
stacked on top of your front loading washing  Electrical connections must be carried out by a
machine. Please contact your dealer or our
qualified technician in compliance with the
After-Sales Service.
manufacturer’s instructions and current standard
Minimum housing dimensions:
safety regulations.
Width: 600 mm
 Electrical connection must comply with local Height: 855 mm
Electricity Board regulations. Depth: 600 mm
 Voltage information, power consumption and the
required fuse protection is shown on the rating
plate mounted at the rear of the dryer.
 The manufacturer cannot accept any liability for
personal injury or damage to property resulting
from failure to adhere to these instructions.
 The dryer must be earthed as prescribed by law.
 Do not use extension leads or multiple adaptors.
 Before any maintenance on the dryer disconnect it
from the mains supply.
 Do not operate the dryer if it has been damaged
during transport. Contact one of our After-Sales
Service technicians.
 Mains cable replacement is only to be carried out by
After-Sales Service.
 After installation access to the mains plug has to be
guaranteed, or the all-pole disconnection has to be
possible with a switch.
3. Installation
 The appliance must not be installed behind a
lockable door, a sliding door or a door with a hinge
on the opposite side to that of the tumble dryer.
 Do not install your dryer where it can be subject to
extreme conditions, such as: poor ventilation,
temperatures below 5°C or above 35°C.
 Before running the first cycle ensure the water
container and heat exchanger are correctly positioned.
 Only for water container top version: if possible use
a hose to drain the water directly into the domestic
plumbing system. This will avoid having to empty
the water container at the end of each drying cycle
since the condensation water can be directly
drained away. See also chapter “Drainage System”.
 Take care not to install the dryer on a deep-pile
carpet.
 Take care not to trap the mains cable between the
dryer and the wall.
36

========2========

ELECTRICAL CONNECTION
1) For Great Britain only
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows:
1.Remove the fuse cover (A) and fuse (B).
2.Fit replacement 13A fuse into fuse cover.
3.Refit both into plug.
Important:
The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted.
Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug.
Replacement fuse covers are available from your local electrical store.
2) For the Republic of Ireland only
The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is also used, the 2-pin, side earth type.
3) Socket outlet / plug (valid for both countries) If the fitted plug is not suitable for your socket outlet, please contact Whirlpool Service for further instruction. Please do not attempt to change plug yourself. This procedure needs to be carried out by a qualified Whirlpool technician in compliance with the manufactures instructions and current standard safety regulations.
37

========3========

SAFETY ADVICES AND GENERAL
RECOMMENDATIONS
1. Packing
The packing box may be fully recycled as
confirmed by the recycling symbol . 2. Energy saving tips
 Always dry a full load: depending on the type of
laundry and the programme/drying time.  By preference use the maximum spin speed allowed
by your washing machine, since draining the water
mechanically requires less energy. You will save time
and energy when running your drying cycle.  Do not overdry the laundry.
 Clean the lint filter after every drying cycle.  Place your dryer in a room with a temperature
between 15° C and 20° C. In case of higher
temperature ventilate the room.
 Always select the correct programme/drying time for
the load in order to obtain the desired drying results.  Select the gentle option only with small loads.  When drying cotton, for example. dry iron dry and
cupboard dry loads together. Start with the iron dry
programme/drying time setting, remove the laundry
to be ironed at the end of that cycle and dry the
remainder of the load on the cupboard dry setting. 3. Disposing of packaging and old Dryer:
The dryer is built from reusable materials. The
dryer must be disposed of in compliance with local
waste disposal regulations.
 Before scrapping, cut off the power cable so that
the dryer cannot be connected to the mains. 4. Child safety:
Children must not be allowed to play with the dryer. 5. General recommendations:
 Always set the programme/time selector knob to
the “0” position after use.This prevents the dryer
from being switched on accidentally.
 Before cleaning or carrying out maintenance, switch
off the dryer and disconnect it from the mains supply.  To clean the outside of the dryer, use a neutral
detergent and a damp cloth.
 Do not use abrasive detergents.
 Do not use inflammable cleansing agents.  Do not use the tumble dryer if chemicals have been
used for cleaning.
 Garments treated or contaminated with flammable
cleaning sprays or liquids such as petrol, cooking oil
or aerosol sprays must not be put in this dryer.  Lighters must not be left in pockets.
 Never use and store flammable materials nearby
the dryer.
38




Wipe away lint from the door seal and the door using a damp cloth.
If the lint filter mesh is clogged, clean it with water and a soft brush.
Since lint can go through the filter it is necessary to clean, from time to time, the complete filter area (including below the filter) with a brush, a damp cloth or with a vacuum cleaner.
If necessary, the power cable may be replaced with an identical one obtained from our After-Sales Service. The power cable must only be replaced by a qualified technician.

Attention rear panel can be hot.

EC Declaration of Conformity
This dryer has been designed, constructed and distributed in compliance with the safety requirements of EC Directives:
 73/23/EEC Low Voltage Directive  89/336/EEC EMC Directive
 93/68/EEC CE Marking Directive.
This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.  The dryer must be used in the household for the
described uses.

========4========

DESCRIPTION OF THE DRYER
A. Work top.
B1.Water Container bottom
version or
B2.Water Container top version. C. Contact pin.
D. Door:
To open the door: pull the
handle.
To close the door: push gently
until closed.
E. Filter.
F. Child Safety Lock.
G. Button for heat exchanger flap
opening.
H. Heat exchanger.
A
B2
C
F
E
G
D
Note: Depending on the model, the opening of the flap can be horizontal or vertical. This doesn’t change the functioning of the flap.
H
B1
REMINDER - MAINTENANCE AND CLEANING
EACH DRYING CYCLE
 Clean the lint filter at the end of every
drying cycle.
Open the door.
Pull the filter upwards.
Open the filter.
Remove lint using a soft brush or your
fingertips.
Close the filter.
Push the filter back into place.
 Empty the water container at the end of
each drying cycle.
EACH MONTH
 Clean the heat exchanger at least every
month (see “HEAT EXCHANGER” chapter).
Wipe away any lint/fluff from the door seal and
interior using a damp cloth.
Remove fibres in and around the water evacuation hole (at least once per month).
39

========5========

DRAINAGE SYSTEM
For water container top only
B
To avoid having to empty the water container at the end of each cycle, the condensation water can be drained away.
Note: normally the drain hose is not supplied; the accessory kit, available at your dealer or our After-Sales Service should be used.
Please contact your dealer or our After-Sales Service to get the reference of this accessory, which should be used.
The connection for direct draining is at the rear of the dryer.
A. Place an absorbent cloth
underneath to collect water
spillage.
B. Remove the hose located at the
lower rear part of the dryer and
insert it in the nearby hole. C. Fix the hose (length: 1.5 m) to the
outlet connection. The height
difference between the two
drainage connections should not
exceed 1 m.
Notice: To avoid siph oning, the end
of the hose must not be
immersed in the drain water.
Avoid bending and twisting
the hose.
C
1m
40

========6========

DOOR REVERSIBILITY / CHILD SAFETY LOCK
Door Reversibility
A. Unplug the dryer.
B. Open the door.
C. Using a spanner, turn the contact pin in the upper part of the door
by 90° and remove it.
C
D. Unscrew the 2 screws of the door hinge and remove the door. E. Removing the door lock:
Unscrew the 2 screws above and below the door lock system.
Lift the door lock from the bottom, sliding it upwards about
1.5 cm, and remove it.
F. Reverse the door:
Fasten the door on the desired side with the 2 screws.
Take care to screw in horizontal position to avoid pinching of the seal. G. Insert the door lock system on the opposite side of the hinge
fixation and push it down 1.5 cm.
H. Fix the 2 screws above and below the door lock system. I. Take care not to reverse the sense of the door lock system.
The child safety must be above the locking mechanism. J. Replace the contact pin in the inside of the door (top).
C
D
Child Safety Lock
How to use the child safety lock
1. Open the door.
2. Using a coin or a screwdriver, turn the plastic screw (I) clockwise 90°.
Slot vertical: the door cannot be locked.
Slot horizontal: the door can be locked.
E
I
E
41

========7========

HEAT EXCHANGER
Before cleaning or carrying out maintenance, switch off the dryer.
Clean the heat exchanger at least every month, proceeding as follows:
A. Open the door and press the heat
exchanger flap button on the
bottom of the door entrance. B. The heat exchanger flap opens. C. Fold the heat exchanger handle
upwards to the horizontal position
and remove the heat exchanger. D. Clean the heat exchanger under
running water by turning it around
to reach all sides, especially in
front and behind.
E. Wipe away dust and lint from the
seals and the heat exchanger plates. F. Remove the lint in the heat
exchanger housing. Keep the
drainage hole (left side in front in
the housing) free from lint. G. Insert completely the heat
exchanger in its housing (TOP or
HAUT mark upwards) keeping the
handle in horizontal position, and
then push down the handle. H. Close the flap.
A
B
C
The heat exchanger aluminium plates may become discoloured over time.
Note: Depending on the model, the opening of the flap can be horizontal or vertical. This doesn’t change the functioning of the flap.
D
42

========8========

TROUBLESHOOTING GUIDE / AFTER-SALES SERVICE
Troubleshooting Guide
After-Sales Service
If a fault occurs, before contacting our After- Sales Service, make the following checks to try and remedy the problem:
Drying takes too long / laundry is not dry enough:  Was the correct programme selected?
 Was the inserted laundry too wet (Washing
machine spin speed less than 800 rpm? When the
spinning speed is less than 800 rpm the water
container fault may occur during the drying cycle)?  Is the lint filter dirty (filter indicator lamp on)?  Is the heat exchanger dirty? (refer to the
Instructions for use)
 Is the ambient temperature too high?
 Are the END and Anti-crease indicator lamps
lighting up? The drying cycle is complete and the
laundry can be taken out.
 Is the gentle option selected ?
If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee).
Please specify:
 The nature of the fault.
 The dryer type and model.
 The service code (the number after the word
Service on the adhesive rating plate) on the
right-hand side when the door is open.  Your full address and phone number.
The dryer does not operate:
(after a power failure and/or interruption to the mains supply, always press the Start/Pause button).
 Is the plug properly inserted into the mains
electricity socket?
 Is there a power failure?
 Has the fuse blown?
 Is the door properly closed?
 Has the programme been selected?
 Has the start delay option been selected?  Has the Start/Pause button been pressed?
Lint filter, water container or heat exchanger indicator lamp on:
 Is the lint filter clean?
 Is the water container empty?
 Is the water container correctly positioned?  Is the heat exchanger clean and the reset operation
done?
Water droplets underneath the dryer:  Is the heat exchanger correctly positioned?  Has any fluff on the heat exchanger seal been wiped
away?
 Has any fluff on the door seal been wiped away?  Has the water container been positioned correctly?  Is the dryer levelled?
43

========9========



For more information, please download the instructions above.

Category Clothes dryer
Full name WHIRLPOOL AWZ 8465 WP
Model AWZ 8465 WP
Size of file 371 KB
Number of pages 9 pages
format file is in pdf
Language(s) Clothes dryer WHIRLPOOL AWZ 8465 WP English English