Download manual or user guide for the product:
SAMSUNG HT BD8200 - Home theater


On this page you can get: Home theater SAMSUNG HT BD8200 manual - is available for free download. All information such as file size, preview picture, category manual, model and more, you can find below.

After downloading the file, save it in safe place for example in "My documents" or "Desktop" folder. Pdf file can be able to view any time also in "offline state" (without internet connection).
We hope, that this document of instructions for use will help you.
PDF Download manual now - for free Home theater SAMSUNG HT BD8200
Click to preview
Home theater SAMSUNG HT BD8200 Home theater SAMSUNG HT BD8200

If this site help you save (or earn) some money.
Say thanks by making a small donation ;)



For each support THANK YOU very much!!!
Size of file: 6643 KB (format file is in: pdf)
Preview instructions for use
HT-BD8200

2.1CH Blu-ray Home Cinema System
user manual

imagine the possibilities
Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/register


========1========

Key features of your new Blu-ray Home Cinema
PLAYER FEATURES
Playback of many disc types, plus an FM Tuner The HT-BD8200 allows you to play various discs, including BD-ROM, DVD-VIDEO, DVD-RW/-R(V mode), CD, MP3, JPEG, DivX, MKV, MP4 and CD-R/RW, with a sophisticated FM tuner, all in a single player. Full HD Audio Decoding Support (DD,DD+,DOLBY TRUE-HD,DTS,DTS-HD HRA, DTS-HD MA Essential) Please refer to www.DOLBY.COM and DTS.COM for more detail. TV Screen Saver Function If the main unit remains in stop mode for 5 minutes, the Screen Saver mode will start. The HT-BD8200 automatically switches itself into the power saving mode after 15 minutes in the Screen Saver mode. Power Saving Function The HT-BD8200 automatically shuts itself off after 20 minutes in Stop mode. USB Host support You can connect and play files from external USB storage devices such as MP3 players, USB flash memory, etc. using the Home Cinema's USB HOST function. HDMI HDMI transmits Blu-Ray/DVD video and audio signals simultaneously, and provides a clearer picture. The 1080p(Full HD) resolution provides even clearer pictures. AV SYNC Function Video may lag behind the audio if the unit is connected to a digital TV. To compensate for this, you can adjust the audio delay time to sync up with the video. Anynet+(HDMI-CEC) Function Anynet+ is a function that can be used to operate the main unit of this system using a Samsung TV remote control, by connecting the Blu-ray Home Cinema to a SAMSUNG TV using an HDMI Cable. (This is only available with SAMSUNG TVs that support Anynet+.) iPod & iPhone support You can enjoy music files by connecting your iPod to the home cinema with the supplied iPod dock. BD Wise BD Wise automatically adjusts BD Wise-compliant Samsung products to the optimal settings between them. This feature is enabled only if BD Wise-compliant Samsung products are connected to each other using an HDMI cable. Wireless Subwoofer You can hear powerful sound from the subwoofer without having to use speaker cables.

2


========2========

BLU-RAY DISC FEATURES
Blu-ray Discs support the highest quality HD video available in the industry - Large capacity means no compromise on video quality. Furthermore, a Blu-ray Disc has the same familiar size and look as a DVD. * The following Blu-ray Disc features are disc dependant and will vary. Appearance and navigation of features will also vary from disc to disc. Not all discs will have the features described below. Video highlights The BD-ROM format for movie distribution supports three highly advanced video codecs, including AVC, VC-1, and MPEG-2. HD video resolutions are also available: · 1920 x 1080 HD · 1280 x 720 HD
PLAY MOVIE LANGUAGES SCENE SELECTIONS PREVIEWS

ENG

Graphic Planes

3 4 5 6 7 8 9 10 11 12 13 14 15

For High-Definition Playback To view high-definition contents on a Blu-ray disc, an HDTV (High Definition Television) is required. Some discs may require using the player's HDMI HD Video OUT to view high-definition content. The ability to view high-definition content on a Blu-ray disc may be limited depending on the resolution of your TV. Subtitles You may be able to select different font styles, sizes and colours for the subtitles. Subtitles may also be animated, scrolled or faded in and out, depending on what is contained on the Blu-ray Disc. BD-LIVE You can use a Blu-ray Disc supporting BD-LIVE through a network connection to enjoy various contents provided by the disc manufacturer.

PLAY MOVIE

LANGUAGES

SCENE SELECTIONS

PREVIEWS


3 4 5 6 7 8 9 10 11 12 13 14 15

YouTube This Blue-ray Home Cinema enables you to enjoy videos on-demand provided by YouTube through a network connection.

3


========3========

Key features of your new Blu-ray Home Cinema
WHAT'S INCLUDED
Check for the supplied accessories below.

Video Cable

FM Antenna

iPod Dock

Cradle Stand

Remote Control / Batteries (AAA size)

(small)

User's Manual

Main unit's wall mount bracket screws (M4 x L8, 4EA)

Bracket Wall Mount (2EA) / Bracket Set Mount (2EA)

Wall Mount Sheet

Toroidal Ferrite Core

4


========4========

Safety information
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION : INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. · This apparatus shall always be connected to a AC outlet with a protective grounding connection. · To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. CAUTION · Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. · The Mains plug is used as a disconnect device and shall stay readily operable at any time.

ENG

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1

Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times. IMPORTANT The wires in the mains lead are coloured in accordance with the following code:­ BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:­ The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

5


========5========

Safety information
PRECAUTIONS

Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the Disc Insert slot is empty. This player is designed for continuous use. Switching off the Blu-ray Home Cinema to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.

During thunderstorms, disconnect the AC main plug from the wall outlet. Voltage peaks due to lightning could damage the unit.

Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and malfunction of the unit.

Protect the player from moisture (i.e. vases) , and excess heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use. Use of this product is for personal use only. Condensation may occur if your player or disc has been stored in cold temperatures. If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

The batteries used with this product contain chemicals that are harmful to the environment. Do not dispose of batteries in the general household trash.

Do not upside down the assembled stand and main unit by holding the stand, otherwise the main unit may fall apart from the stand and it may cause product damage or personal injury.

"This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited."

6


========6========

Contents
KEY FEATURES OF YOUR NEW BLU-RAY HOME CINEMA SAFETY INFORMATION

ENG

GETTING STARTED

DESCRIPTION

REMOTE CONTROL

CONNECTIONS

2 5 10 14 16 20

2 3 4

Player Features Blu-ray Disc Features What's Included

5 6

Safety Warnings Precautions

10 11

Before Reading the User's Manual Disc Type and Characteristics

14 15

Front Panel Rear Panel

16 18

Tour of the Remote Control Setting the Remote Control

20 21 21 22 24 26 28 30 30 30

Connecting the Wireless Subwoofer Installing the Cradle Stand Installing the Wall Mount Connecting the Video Out to Your TV Connecting an iPod Connecting Audio from External Components Connecting to the Network Connecting the FM Antenna Cooling Fan Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit Before Playing On-Screen Menu Navigation Playing a Disc Setting the Sound Using the Search and Skip Functions Slow Motion Play/Step Motion Play Setting the Clock

BASIC FUNCTIONS OF YOUR BLU-RAY HOME CINEMA

31
SYSTEM SETUP LANGUAGE SETUP

31 32 32 33 33 34 35

35 36

36

Setting up the Language Options

7


========7========

Contents
AUDIO SETUP
37 Setting up the Speaker Options

37
DISPLAY SETUP

40
HDMI SETUP

40 42

Setting up the Display Options Setting up the Video Display/Output Options

44

Setting up the HDMI Setup Options

44
PARENTAL SETUP
47 Setting up the Parental Lock

47
NETWORK SETUP
49 Setting up the Network Setup Options

49
BD DATA MANAGEMENT
54 System Device Management

54
SYSTEM UPGRADE

55
WATCHING A MOVIE

55 57 57 57 57 58 59 60 61 61 62 63 63 64

Firmware Upgrade System Information Firmware Upgrade Notification DivX (R) Registration DivX (R) Deactivation Using the Display Function Using the Disc Menu & Popup/Title Menu Repeat Play Selecting the Audio Language Selecting the Subtitle Language Changing the Camera Angle PIP (Picture In Picture) Settings BD-LIVETM DivX, MKV, MP4 Playback

58
8


========8========

LISTENING TO MUSIC

66 66 67

66
VIEWING A PICTURE

Buttons on the Remote Control Used for Audio CD(CD-DA)/ MP3 Disc Playback Repeat Audio CD(CD-DA) & MP3 Playing an Audio CD(CD-DA)/MP3

ENG

69
USING THE USB FUNCTION

69 69 69 70 70

Viewing a Picture Slide Show/Speed Rotate Zoom Go To Photo List

71

USING AN iPod

PC STREAMING FUNCTION

USING THE E-CONTENTS

71 73 74 77 79
RADIO

Playing Media Files Using the USB Host Feature

73 73

Listening to Radio Presetting Stations

74 76

Listening to Music Watching a Movie

77

Connecting to a Pc and Playing MP3, JPEG, DIVX, MKV and MP4 Content

79

Using YouTube

CONVENIENT FUNCTION

TROUBLESHOOTING

APPENDIX

84 85 87

84 84 84

Sleep Timer Function Adjusting Display Brightness Mute Function

87 88

Cautions on Handling and Storing Discs Specifications

9


========9========

Getting started
BEFORE READING THE USER'S MANUAL
Make sure to check the following terms before reading the user manual.

Icons that will be used in manual
Icon Term BD-ROM BD-RE BD-R DVD-VIDEO DVD-RW DVD-R Audio CD Definition This involves a function available on a BD-ROM. This involves a function available on the BD-RE. This involves a function available on the BD-R. This involves a function available on DVD-Video or DVD-RW/-R discs that have been recorded and finalized in Video Mode. This involves a function available on DVD-RW. (V mode and finalized only) This involves a function available on DVD-R. (V mode and finalized only) This involves a function available on an audio CD-RW/CD-R (CD-DA format). This involves a function available on DVD-RW/-R, CD-RW/CD-R discs and USB storage devices. This involves a function available on DVD-RW/-R, CD-RW/CD-R discs and USB storage devices. This involves a function available on DVD-RW/-R, CD-RW/CD-R discs and USB storage devices. This involves a function available on USB storage device. This involves a case where a function does not operate or settings may be cancelled. This involves tips or instructions on the page that help each function operate.

h g f Z C V A G F M

MP3 JPEG DivX, MKV, MP4 USB storage device Caution Note

About the use of this user's manual
1) Be sure to be familiar with Safety Information before using this product. (See pages 5~6) 2) If a problem occurs, check the Troubleshooting. (See pages 85 ~86)

Copyright
©2009 Samsung Electronics Co.,Ltd. All rights reserved; No part or whole of this user's manual may be reproduced or copied without the prior written permission of Samsung Electronics Co.,Ltd.

10


========10========

DISC TYPE AND CHARACTERISTICS
Disc types that can be played
Disc Types BD-ROM BD-RE/BD-R Disc Logo Recorded content AUDIO + VIDEO Disc Shape Single sided Single sided(12 cm) DVD-VIDEO AUDIO + VIDEO Double sided(12 cm) Single sided(8 cm) Double sided(8 cm) AUDIO-CD AUDIO Single sided(12 cm) Single sided(8 cm) 12 cm 8 cm 12 cm (4.7GB) 12 cm (4.7GB) Max. Playing minute Playing time depends on the Title 240 480 80 160 74 20 480 (EX : Extended Play) 480 (EX : Extended Play)

ENG
GETTING STARTED

DivX DVD-RW (V mode and finalized only) DVD-R (V mode and finalized only)

AUDIO + VIDEO AUDIO + VIDEO AUDIO + VIDEO

· This player is compatible with the PAL colour system only. · NTSC discs will not play.

Logos of Discs that can be played

Blu-ray Disc

Dolby Digital Plus

DTS-HD High Resolution Audio

PAL broadcast system in U.K, France, Germany, etc.

Dolby TrueHD

DTS-HD Master Audio | Essential

Digital Audio

MP3

Stereo

Java

BD-LIVE

M

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

11


========11========

Getting started
Discs that cannot be played
· · · · HD DVD Disc DVD-RAM 3.9 GB DVD-R Disc for Authoring. DVD-RW(VR mode) · DVD-ROM/PD/MV-Disc, etc · CVD/CD-ROM/CDV/CD-G/CD-I/LD · 8cm MD (mini disc)

M

Some commercial discs and DVD discs purchased outside your region may not be playable with this product. When these discs are played, either "No disc." or "Please check the regional code of the disc." will be displayed.

If a DVD-R/-RW disc has not been recorded properly in DVD video format, it will not be playable.

Region code
Both the Blu-ray Home Cinema and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. The Region Number for this Bluray Home Cinema is described on the rear panel of the Blu-ray Home Cinema.

BD Region Code A B C

Area North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and Southeast Asia. Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand. India, China, Russia, Central and South Asia. DVD-Video Region Code 6 China 7 8 9

DVD-Video Area Region Code 1 USA, Canada Japan, Europe, South Africa, Middle East, 2 Greenland Korea, Taiwan, Hong Kong, parts of South 3 East Asia Australia, New Zealand, Latin America 4 (including Mexico) 5 Eastern Europe, Russia, India, Africa

Area

Unspecified Special Use Airlines/Cruise Ships (including Mexico) Region free

Blu-ray Disc Compatibility
Blu-ray Disc is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Type and Characteristics section of this Manual. If you encounter compatibility problems, please contact the SAMSUNG customer care centre.

M

Playback may not work for some types of discs, or when specific operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to this if necessary. Do not allow the disc to become dirty or scratched. Fingerprints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for playback. Discs with NTSC programs recorded on them cannot be played using this product. When a BD-Java title is played, loading may take longer than a normal title, or some functions may perform slowly.

12


========12========

Disc Types
BD-RE/BD-R
Blu-ray Disc Rewritable/Blu-ray Disc Recordable. BD-RE/BD-R is the ideal format for making backups, or recording personal video.

ENG

BD-ROM
Blu-ray Disc Read Only Memory. A BD-ROM disc contains pre-recorded data. Although a BD-ROM may contain any form of data, most BD-ROM discs will contain movies in High Definition format, for playback on Blu-ray Home Cinemas. This unit can play back pre-recorded commercial BD-ROM discs.

DVD-Video

GETTING STARTED

· A digital versatile disc (DVD) can contain up to 135-minutes of images, 8 audio languages and 32 subtitle languages. It is equipped with MPEG-2 picture compression and Dolby Digital surround, allowing you to enjoy vivid and clear theatre quality images. · When switching from the first layer to the second layer of a dual-layered DVD Video disc, there may be momentary distortion in the image and sound. This is not a malfunction of the unit. · Once a DVD-RW/-R recorded in Video Mode is finalized, it becomes DVD-Video. Pre-recorded (prestamped) commercial DVDs with movies are also referred to as DVD-Videos. This unit can play back pre-recorded commercial DVD discs (DVD-Video discs) with movies.

Audio CD

· An audio disc on which 44.1kHz PCM Audio is recorded. · This unit can play back CD-DA format audio CD-R and CD-RW discs. · The unit may not be able to play some CD-R or CD-RW discs due to the condition of the recording.

CD-R/-RW

· Use a 700MB(80 minutes) CD-R/-RW disc. If possible, do not use a 800MB(90 minutes) or above disc, as the disc may not play back. · If the CD-R/-RW disc was not recorded as a closed session, you may experience delays when playing back the beginning of the disc or all recorded files may not play. · Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may vary depending on contents and discs.

DVD-R Disc Playback

· Once a DVD-R recorded in Video Mode is finalized, it becomes DVD-Video. · This unit can play back DVD-R discs recorded and finalized with a Samsung DVD video recorder. It may not be able to play some DVD-R discs depending on the disc and the condition of the recording.

DVD-RW Disc Playback

· Playback can be performed with DVD-RW discs in the Video Mode and finalized only. · Once a DVD-RW recorded in Video Mode is finalized, it becomes DVD-Video. Ability to play back may depend on recording conditions.

Disc Format
Using MP3 disc
· · · · · CD-R/-RW, DVD-RW/-R recorded with UDF, ISO9660 or JOLIET format can be played back. Only MP3 files with the ".mp3" or ".MP3" extension can be played. Playable bit rate range is from 56 Kbps to 320 Kbps. Playable sample-rate is 32KHz to 48KHz. The unit can handle a maximum of 1500 files and folders under a parent folder. For MP3 files recorded with a VBR(Variable Bit Rates), the sound may cut in and out.

Using JPEG disc

· CD-R/-RW, DVD-RW/-R recorded with UDF, ISO9660 or JOLIET format can be played back. · Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed. · Progressive JPEG is supported.

DVD-RW/-R (V)

· This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this Blu-ray Home Cinema once it has been finalized. · If a disc that has been recorded in Video Mode by a different maker's recorder but has not been finalized, it cannot be played by this Blu-ray Home Cinema.

13


========13========

Description
FRONT PANEL

1
POWER BUTTON FUNCTION BUTTON TUNING DOWN & SKIP ( ) BUTTON STOP BUTTON PLAY/PAUSE BUTTON TUNING UP & SKIP( ) BUTTON OPEN/CLOSE BUTTON DISC SLOT Volume Control BUTTON

2

3

4

5

6

7

8

9

Turns the Blu-ray Home Cinema on and off. The mode switches as follows : BD/DVD DIGITAL AUX TUNER. Goes back to the previous title/chapter/track. Tunes down the FM frequency band. Stops disc playback. Plays a disc or pauses playback. Goes to the next title/chapter/track. Tunes up the FM frequency band. Ejects a disc. Insert disc here. Volume adjustment.

14


========14========

REAR PANEL
1 2 3 4 11

ENG
DESCRIPTION

5 6 7 8 9 10

FM 75 COAXIAL JACK EXTERNAL DIGITAL OPTICAL INPUT JACK LAN TERMINAL

Connect the FM antenna. Use this to connect external equipment capable of digital output. Can be used for connection to BD-LIVE and YouTube. It can be also used for firmware upgrades. A USB storage device can be connected here and used as storage when connected to BD-LIVE. It can also be used for firmware upgrades and MP3/JPEG/DivX/MKV/MP4 playback, as well as for connecting to BD-Live with a wireless LAN adapter. Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture. Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT Jack on this unit. A USB storage device can be connected here and used as storage when connected to BD-LIVE. It can also be used for firmware upgrades and MP3/JPEG/DivX/MKV/MP4 playback. Connect to the 2CH analogue output of an external device (such as a VCR) Connect headphones. Connect the iPod dock connector here. The fan always revolves when the power is on. Ensure a minimum of 10 cm of clear space on all sides of the fan when installing the product.

WIRELESS LAN JACK

HDMI OUT JACK VIDEO OUT JACK

USB HOST

AUX IN JACK HEADPHONE JACK

10 11

iPod JACK COOLING FAN

M

A USB HDD device cannot be used for BD Data storage (BD-LIVE).

15


========15========

Remote control
TOUR OF THE REMOTE CONTROL
21 1 2 3 22 23 24

4 25 26

5 6 7 8 9

27 28

10 11 12 13 14 15 16 17 18 19 20

29

30 31 32 33 34 35 36

16


========16========

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

POWER button BD RECEIVER button TV button Number (0~9) buttons AUDIO button STEP button Tuning Preset/CD Skip buttons PLAY button STOP button SEARCH buttons VOLUME button V-SOUND button MENU button Cursor/ENTER button INFO button COLOR Buttons : RED(A), GREEN (B), YELLOW(C), BLUE(D) POPUP MENU, TITLE MENU button TUNER MEMORY button CANCEL button SLEEP button

19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

MO/ST button DISC MENU button OPEN/CLOSE button DIMMER button BD button TUNER button AUX button SOURCE button SUBTITLE button PAUSE button MUTE button TUNING/CH button RETURN button EXIT button ZOOM button (JPEG Only) PIP button REPEAT button DSP button REPEAT A-B button SLOW button

ENG
REMOTE CONTROL

Installing batteries in the Remote Control

1.

Lift the cover at the back of the remote control upward as shown.

2.

Install two AAA size batteries. Make sure to match the "+" and "­" ends of the batteries with the diagram inside the compartment.

3.

Replace the cover. Assuming typical TV usage, the batteries last for about one year.

17


========17========

Remote control
SETTING THE REMOTE CONTROL
You can control certain functions of your TV with this remote control. When operating a TV with the remote control 1. Press the TV button to set the remote to TV mode. 2. Press the POWER button to turn on the TV. 3. While holding down the POWER button, enter the code corresponding to your brand of TV. · If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. Example : For a Samsung TV While holding down the POWER button, use the number buttons to enter 00, 15, 16, 17 and 40. 4. If the TV turns off, the setting is complete. · You can use the TV POWER, VOLUME, CHANNEL, and Numeric buttons (0~9).

M

The remote control may not work on some brands of TVs. Also, some operations may not
be possible depending on your brand of TV.

If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.

Operation Range of the Remote Control
The remote control can be used up to approximately 7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.

18


========18========

TV Brand Code List
No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

ENG

Brand
Admiral (M.Wards) A Mark Anam

Code
56, 57, 58 01, 15 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14

No.
44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

Brand
MTC NEC Nikei Onking Onwa Panasonic Penney Philco Philips Pioneer Portland Proton Quasar Radio Shack RCA/Proscan Realistic Sampo Samsung

Code
18 18, 19, 20, 40, 59, 60 03 03 03 06, 07, 08, 09, 54, 66, 67, 73, 74 18 03, 15, 17, 18, 48, 54, 59, 62, 69, 90 15, 17, 18, 40, 48, 54, 62, 72 63, 66, 80, 91 15, 18, 59 40 06, 66, 67 17, 48, 56, 60, 61, 75 18, 59, 67, 76, 77, 78, 92, 93, 94 03, 19 40 00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60, 98

AOC Bell & Howell (M.Wards) Brocsonic Candle Cetronic Citizen Cinema Classic Concerto Contec Coronado Craig Croslex Crown Curtis Mates CXC Daewoo

01, 18, 40, 48 57, 58, 81 59, 60 18 03 03, 18, 25 97 03 18 46 15 03, 05, 61, 82, 83, 84 62 03 59, 61, 63 03 02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34, 35, 36, 48, 59, 90

REMOTE CONTROL

Sanyo Scott Sears Sharp Signature 2000 (M.Wards) Sony Soundesign Spectricon SSS Sylvania Symphonic Tatung Techwood Teknika TMK Toshiba Vidtech Videch Wards Yamaha York Yupiteru Zenith Zonda Dongyang

19, 61, 65 03, 40, 60, 61 15, 18, 19 15, 57, 64 57, 58 50, 51, 52, 53, 55 03, 40 01 18 18, 40, 48, 54, 59, 60, 62 61, 95, 96 06 18 03, 15, 18, 25 18, 40 19, 57, 63, 71 18 59, 60, 69 15, 17, 18, 40, 48, 54, 60, 64 18 40 03 58, 79 01 03, 54

Daytron Dynasty Emerson Fisher Funai Futuretech General Electric (GE) Hall Mark Hitachi Inkel JC Penny JVC KTV KEC KMC LG (Goldstar) Luxman LXI (Sears) Magnavox Marantz Matsui MGA Mitsubishi/MGA

40 03 03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85 19, 65 03 03 06, 40, 56, 59, 66, 67, 68 40 15, 18, 50, 59, 69 45 56, 59, 67, 86 70 59, 61, 87, 88 03, 15, 40 15 01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44 18 19, 54, 56, 59, 60, 62, 63, 65, 71 15, 17, 18, 48, 54, 59, 60, 62, 72, 89 40, 54 54 18, 40 18, 40, 59, 60, 75

19


========19========

Connections
This section involves various methods of connecting the Blu-ray Home Cinema to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

CONNECTING THE WIRELESS SUBWOOFER
The Subwoofer's linking ID is preset at the factory and the main unit and sub should link (connect wirelessly) automatically when turned on. If the link indicator does not light when main unit and subwoofer are turned on, please set the ID by following the process below. 1. Plug the power cords of the main unit and subwoofer into the AC power supply. 2. Press the ID SET button on the back of the subwoofer with a small, pointed object for 3 seconds. · The STANDBY indicator is turned off and the LINK indicator (blue LED) blinks quickly.

The rear of the Subwoofer
3. In stand-by mode while the main unit is off, press the 0, 1, 3, 5 buttons in order. · The red stand-by LED of main unit flashes white and turns in red again. 4. Press the POWER button to turn on the main unit.

The top of the Subwoofer

· The main unit and the subwoofer are now linked (connected). · The Link indicator (blue LED) on the subwoofer is turned on.

M

Before moving or installing the product, be sure to turn off the power and disconnect the power
cord.

If the main unit is powered off, the wireless subwoofer will be in the standby mode and the
STANDBY LED on the upper side will blink.

If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment, or any
other device that uses the same frequency (2.4GHz) near the system, some sound interruption may be heard due to interference. The transmission distance of a radio wave is about 10m, but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is between the main unit and the wireless receiver module, the system may not operate at all, because the radio wave cannot penetrate metal. If the main unit doesn't make wireless connection, follow steps 1-4 above to retry the connection between the main unit and wireless subwoofer.

The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from
water and moisture.

For optimal listening performance, make sure that the area around the wireless subwoofer
location is clear of any obstructions.

20


========20========

INSTALLING THE CRADLE STAND
You can use the cradle stand to install this unit on a shelf. Make sure you place the unit on a flat surface.

ENG

Connecting
Face the FRONT mark on the stand forward and slide the stand into the bottom of the unit until you hear a click.

CONNECTIONS

INSTALLING THE WALL MOUNT
1. Disconnect the cradle stand from the unit. 2. Peel off the film from the double-sided adhesive sheet for the wall mount and attach it on a clean wall. 3. Secure the wall mount bracket using 6 screws (not supplied) while aligning holes marked on the sheet.

4. Attach the back unit bracket (bracket set mount) with the Home Cinema unit by fastening provided 4 screws.

5. Fully insert the back bracket's clasp into the wall mount bracket's receptacle and fix it by fully sliding to the right. · Installation completed.

Do not install on a place other than a vertical wall. When installating, avoid locations with high temperature or humidity, or a wall that cannot
sustain the weight of the set.

Check the strength of the wall. If the strength of the wall is insufficient for the product
installation, make sure to reinforce the wall before the installation.

Check the material of the wall. If the wall is made of plaster board, marble, or iron board,
purchase and use the appropriate fixing screws.

Cables connecting to external devices are to be connected to the unit before installing. Be sure to turn off the unit before installation. Otherwise, it may cause electric shock. Do not turn the assembled cradle stand and main unit upside down, as the main unit may fall
from the stand and cause product damage or personal injury.

M

Do not hang onto the installed unit and avoid any impact to the unit. Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an
injury or damage to the product.

When the unit is installed on a wall, please make sure that a child does not pull any of
connecting cables, as it may cause it to fall.

21


========21========

Connections
CONNECTING THE VIDEO OUT TO YOUR TV
Choose one of the two methods for connecting to a TV. 1. Pull the fixing tab of the Toroidal ferrite core to open it. 2. Attach the Toroidal ferrite core to the main unit HDMI cable as the figure shows and press it until it clicks.

METHOD1

METHOD2 (supplied)

METHOD 1 : HDMI (BEST)
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the Blu-ray Home Cinema to the HDMI IN jack on your TV.

M

Certain HDMI output resolutions may not work, depending on your TV. HDMI automatically within 10 seconds.

If an HDMI cable is connected from the player to a TV, the Blu-ray Home Cinema's output is set to When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the
HDMI output resolution will automatically be set to the highest provided by the TV.

If you connect a Samsung TV to the Blu-ray Home Cinema using an HDMI cable, the player can
be easily operated using the TV remote control. (This is only available with Samsung TVs that support the Anynet+ feature.) (See page 44) After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI) on your Blu-ray Home Cinema. See your TV owner's manual for more information on how to select the TV's Video Input source.

22


========22========

HDMI Auto Detection Function
The player's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on. For possible HDMI resolutions, see page 41.
· HDMI (High Definition Multimedia Interface) HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the Blu-ray Home Cinema transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. · HDMI connection description HDMI connector - Supports video and digital audio data. - HDMI outputs only a pure digital signal to the TV. - If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen. · Why does Samsung use HDMI? Analogue TVs require an analogue video/audio signal. However, when playing a BD/DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analogue converter (in the Blu-ray Home Cinema) or an analogue-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV. · What is the HDCP? HDCP (High-band width Digital Content Protection) is a system for protecting BD/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made. · What is Anynet+? Anynet+ is a convenient function that offers linked operation of this unit through Samsung TVs with the Anynet+ feature. - If your Samsung TV has an logo, then it supports the Anynet+ function. - If you turn on the player and insert a disc, the player will start playing the disc, and the TV will turn on automatically and switch to HDMI mode. - If you turn on the player and press the PLAY button with a disc already inserted, the TV will immediately turn on and switch to HDMI mode. · What is BD Wise? BD Wise is Samsung's latest inter-connectivity feature. - When you connect Samsung products with BD-Wise to each other via HDMI, the optimum resolution will be set automatically.

ENG
CONNECTIONS

METHOD 2 : Composite Video (GOOD)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the Blu-ray Home Cinema to the VIDEO IN jack on your TV.

M

The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the SETUP menu. (See page 42) corresponding Video output (Composite) on your Blu-ray Home Cinema. See your TV owner's manual for more information on how to select the TV's Video Input source.

After making the video connection, set the Video input source on your TV to match the

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by
copyright protection systems and the picture will be distorted on the television.

23


========23========

Connections
CONNECTING AN iPod
You can enjoy music and video files from an iPod through the main unit. For iPod operation with this Blu-ray home cinema, see pages 25 and 74 ~ 76.

(supplied)

1. Connect the iPod Dock to the iPod Jack on the rear side of the main unit. 2. Place the iPod in the dock. · "iPod Connected" message appears on the TV screen.

M


You must have the VIDEO output connected to your TV to view iPod video (See page 25). disconnecting the ipod docking cable. Adjust the volume to a moderate level before you connect your iPod and Blu-ray home cinema. When the unit is powered on and you connect an iPod, the unit will charge your iPod's battery. Make sure to connect the dock connector so that the label "SAMSUNG" faces backward. "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.

As the cable ports are close together, be sure to remove the USB memory drive before

24


========24========

iPod models that can be used with the HT-BD8200

ENG
CONNECTIONS

M

"Made for iPod" means that an electronic accessory has been designed to connect specifically to the iPod and has been certified by the developer to meet Apple performance standards. "Works with iPhone" means that an electronic accessory has been designed to connect specifically to an iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.

25


========25========

Connections
CONNECTING AUDIO FROM EXTERNAL COMPONENTS
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the main unit to the Digital Output of the external digital component. 2. Press the FUNCTION button on the main unit to select DIGITAL input. · The mode switches as follows : BD/DVD DIGITAL AUX TUNER.

Optical Cable
(not supplied)

M

To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV. components.

This system supports Digital sampling frequencies of 32 kHz of higher from external digital This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream
cannot be supported.

26


========26========

AUX : Connecting an External Analogue Component
Analogue signal components such as a VCR. 1. Connect AUX IN (Audio) on the main unit to the Audio Out of the external analogue component. · Be sure to match connector colours. 2. Press the AUX button on the remote control to select AUX input. · You can also use the FUNCTION button on the main unit. The mode switches as follows : BD/DVD DIGITAL AUX TUNER.

ENG
CONNECTIONS

1. Pull the fixing tab of the Toroidal ferrite core to open it. 2. Make a loop in the AUX cable as the figure shows. 3. Attach the Toroidal ferrite core to the main unit Audio cable as the figure shows and press it until it clicks.

(small) Audio Cable (not supplied)
If the external analogue component has only one Audio Out, connect either left or right.

M

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.

27


========27========

Connections
CONNECTING TO THE NETWORK
To access network service or upgrade the current firmware, you must make one of the following connections. By connecting to a network, you can access the BD-LIVE, YouTube services, PC streaming and Software upgrades from Samsung's update server. We recommend you use an AP or router for the network. If you don't have one, you'll need two network providing services to use the PC streaming function.

Case 1 : Connecting a Direct LAN Cable to your Modem
1. Using a Direct LAN Cable (UTP cable, not supplied), connect the LAN terminal of the Blu-ray Disc Player to the LAN terminal of your modem.

To LAN port

Connecting using a router (e.g. DSL)
Broadband modem (with integrated router) Or Router Broadband modem

Broadband service To LAN port

To LAN port

Broadband service

PC connection to Router for PC streaming

M

To use the PC streaming function (see pages 77~78), please make a network between your PC and router. use or the ISP's policy. For more information, contact your ISP (Internet Service Provider).

Internet access to Samsung's update server may not be allowed, depending on the router you

For DSL users, please use a router to make a network connection.

28


========28========

Case 2 : Connecting to a Wireless IP sharer
You can connect to network with a Wireless IP sharer. See page 50 for Wireless Network Setup.

ENG

Modem Port Wireless LAN Adapter (not supplied)

CONNECTIONS

Wireless IP sharer

Modem Cable

M

This unit is compatible with the Samsung Wireless LAN Adapter only. (not supplied) (Model name: WIS09ABGN). - The Samsung Wireless LAN Adapter is sold separately. - Contact a Samsung Electronics agent or service centre for purchasing. for stable operation of the wireless network.)

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended Wireless LAN, in its nature, may cause interference, depending on the use condition (AP
performance, distance, obstacle, interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported. When applying the security key for the AP (wireless IP sharer), only the following is
supported. 1) Authentication Mode : WEP, WPAPSK, WPA2PSK 2) Encryption Type : WEP, TKIP, AES

Connect the Wireless LAN Adapter to only the Wireless LAN Jack on the back of the main
unit.

29


========29========

Connections
CONNECTING THE FM ANTENNA
1. Connect the FM antenna supplied to the FM 75 COAXIAL Jack. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

FM Antenna (supplied)

M

This unit does not receive AM broadcasts.

COOLING FAN
The cooling fan supplies cool air to the unit to prevent overheating. Please observe the following cautions for your safety.
· Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit may rise and may damage it. · Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD OF THE MAIN UNIT
If you attach a Toroidal ferrite core to the power cord of the man unit, it will prevent help to prevent RF interference from radio signals. 1. Pull the fixing tab of the Toroidal ferrite core to open it. 2. Make a loop twice in the main unit power cord. 3. Attach the Toroidal ferrite core to the main unit power cord as the figure shows and press it until it clicks.

30


========30========

Basic functions of your Blu-ray Home Cinema
This section introduces basic playback functions and playback by disc type.

ENG

BEFORE PLAYING
· Turn on your TV and set it to the correct Video Input (the input the Blu-ray Home Cinema is connected to). BASIC FUNCTIONS After plugging in the player, the first time you press the POWER button, this screen comes up: If you want to select a language, press a NUMBER button. (This screen will only appear when you plug in the player for the first time.) If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use. Once you select a menu language, you can change it by pressing the STOP () button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the MENU LANGUAGE SELECTION window appears again where you can reset your preferred language.
MENU LANGUAGE SELECTION Press 1 for English Pulsar 2 para Español Touche 3 pour Français Drücken Sie 4 für Deutsch Premere 5 per Italiano Druk op 6 voor Nederlands Macrovision : BBS42

M

Discs which can be played on this player (For the following discs, the ability to play back may depend on recording conditions.) · BD-ROM · BD-RE · BD-R · DVD-R · DVD-RW (V mode) · CD-RW/CD-R · DivX · MKV · MP4 · The unit may not play certain CD-RW/CD-R and DVD-R due to the disc type or recording conditions. · HD DVD · DVD+RW · DVD-ROM · DVD-RAM · CD-ROM · CVD · Super Audio CD(except CD layer) · DVD+R · CDV · CD-I · CDGs play audio only, not graphics.

Discs which cannot be played on this player.

Blu-ray is a new and evolving format. Accordingly, disc compatibility issues with new and
existing format discs are possible. Not all discs are compatible and not every disc will playback. For additional information, refer to the Disc Type and Characteristics section of this Manual. If you encounter compatibility problems, please contact SAMSUNG's customer care centre.

31


========31========

Basic functions of your Blu-ray Home Cinema
ON-SCREEN MENU NAVIGATION
The GUI (Graphical User Interface) in this manual may differ, depending on the firmware version.
System System Information Time Zone Clock Set Language Audio Subtitle DivX Subtitle Disc Menu Power On/Off sound BD Data Management DivX(R) Registration DivX(R) Deactivation System Update Dynamic Compression TV Aspect Movie Frame (24 Fs) Resolution Progressive Mode Still Mode Screen Message Light Effect HDMI Network Network Selection Cable Network Wireless Network Proxy NTP Server Network Connection Test BD-LIVE Internet Connection Parental Parental Lock Rating Level Anynet + (HDMI-CEC) HDMI Format BD Wise HDMI Audio AV Sync Test Tone Speaker Distance Sound Edit

Video Music Photo Setup
Audio Display

Menu

e-Contents

YouTube

New Password

PLAYING A DISC
1. Press OPEN/CLOSE button to open the compartment. 2. Load a disc vertically into the disc slot. · Place a disc gently into the slot with the disc's label facing out. · Playback starts automatically. 3. If the disc does not play automatically, it will display the main disc menu. · To play a Blu-Ray disc from the disc menu, press ENTER. · To play a DVD from the disc menu, press PLAY or ENTER.

M
32

When you stop disc play, the player remembers where you stopped, so when you press PLAY button again, it will pick up where you left off. This is called the "Resume" function. With some Blu-ray discs(BD-J), this function may not work. Press the STOP button twice during playback to disable the Resume function. To pause the playback, press the PAUSE button during playback. To resume, press the PLAY button. If the player is left in the stop mode more than 5 minutes without any user interface, a screen saver will appear on your TV. If the player is left in the screen saver mode for more than 15 minutes, the power will automatically turn off except during playback of an CD-DA (Automatic Power-Off Function). If no buttons are pressed on the unit or remote control for more than 5 minutes when the unit is in Pause mode, a screen saver will appear on your TV.


========32========

SETTING THE SOUND
Setting the Power On / Off Melody Sound
A Melody sound can be set so it is heard each time you turn the player on or off. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the ENTER or button. 3. Press the buttons to select System, then press the ENTER or button. 4. Press the buttons to select Power On/Off sound, then press the ENTER or button. 5. Press the buttons to select On or Off, then press the ENTER or button. 6. Press the MENU button to exit the setup menu.
DVD

ENG

Music Photo Setup System Language Audio Display HDMI Network Parental


System Information Time Zone Clock Set Power On/Off sound : On On Off BD Data Management DivX(R) Registration DivX(R) Deactivation System Update


BASIC FUNCTIONS

USING THE SEARCH AND SKIP FUNCTIONS
During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.

Searching through a Chapter or Track

hgfZCV

During playback, press the SEARCH ( ) button. Each time you press the SEARCH button, the playback speed will change as follows.
BD-ROM, BD-RE, BD-R, DVD-VIDEO, DVD-RW, DVD-R DivX, MKV, MP4 X 2 © X 4 © X 8 © X 16 © X 32 © X 128 X 2 © X 4 © X 8 © X 16 © X 32 © X 128 X2©X4©X8

· You can scan the program in reverse. · To return to normal speed playback, press the PLAY button.

M

No sound is heard during search mode.

Skipping Tracks
During playback, press the SKIP ( ) button.

hgfZCV

When playing a Blu-ray Disc/DVD, if you press the SKIP ( ) button, it moves to the next chapter. If you press the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to the beginning of the previous chapter.

33


========33========

Basic functions of your Blu-ray Home Cinema
SLOW MOTION PLAY/STEP MOTION PLAY
Slow Motion Play
In pause or step mode, press the SLOW button on the remote control for Slow Motion play. · If you press the SLOW button, 1/8 1/4 1/2 · To return to normal speed playback, press the PLAY ( ) button.

hgfZCV

M

This (

) icon indicates an invalid button press.

No sound is heard during slow mode. Slow motion operates only in the forward direction.

Step Motion Play
Press the STEP button on the remote control during play for Step Motion play.

hgfZCV

· Each time the button is pressed a new frame will appear. · When the STEP button is pressed, the next frame will be activated. · Press the PLAY ( ) button to resume normal play.

M

No sound is heard during step mode.

Step motion operates only in the forward direction.

34


========34========

System setup
SETTING THE CLOCK
Choose your time zone
1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the ENTER or button. 3. Press the buttons to select System, then press the ENTER or button. 4. Press the buttons to select Time Zone, then press the ENTER or button. 5. Use the button to place the cursor to the appropriate time zone for your area and press the ENTER button.
DVD DVD

ENG

Music

SYSTEM SETUP

Photo Setup System Language Audio Display HDMI Network Parental


System Information Time Zone Clock Set Power On/Off sound : On BD data management DivX(R) Registration DivX(R) Deactivation System Update


Music Photo Setup System Setup Language Setup Audio Setup Display Setup HDMI Setup Time Zone System Information


Time Zone Clock Set Power On/Off sound : On BD data management DivX(R) Registration



Network SetupGMT + 00:00 DivX(R) Deactivation London, Lisbon Parental Setup System Update

Save

Return

M

To set the time automatically, set the NTP server to On (see page 53).

Set the clock
To setup, follow steps 1 through 3 above.
Music

4. Press the buttons to select Clock Set, then press the ENTER or button.

System Information Photo
DVD

Time Zone System Language Audio Display HDMI Network Parental


Setup

Clock Set Power On/Off sound : On BD data management DivX(R) Registration DivX(R) Deactivation System Update



5. Press the buttons to move to "da."(date), "hr" (hour), "min" (minute). Set the date and time by pressing the buttons, then press the ENTER button.

Music System Information Photo
DVD

Setup

Time Zone Clock Set Clock Set da. hr. min. Power On/Off sound : On Language 01 management 01 Audio JAN/01/2009 BD data System Display Thursday HDMI Network Parental DivX(R) Registration DivX(R) Deactivation Save System UpdateReturn



35


========35========

Language setup
SETTING UP THE LANGUAGE OPTIONS
Once you set the audio, subtitle, disc menu and player menu language options, they will be applied automatically every time you watch a movie.

M

If you want to choose a different audio and subtitle language while playing a disc, you can also use the disc menu to make the selection.

1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the ENTER or button.
DVD

Music Photo Setup


System


Language Audio Display HDMI Network Parental

3. Press the buttons to select Language, then press the ENTER or button. Language setup menu will be displayed.

Music Photo
DVD

System Language Audio Display HDMI Network Parental Audio Subtitle : English : Auto


Setup

DivX Subtitle
Disc Menu Menu

: Western
: English : Auto

4. Press the buttons to select the desired language option, press the ENTER or button.
DVD

Music Photo Setup System Language Audio Display HDMI Network Parental


Audio Subtitle

DivX Subtitle
Disc Menu Menu

: Original English Français : Auto Deutsch : Western Español : English Italiano : Auto Nederlands



· Audio : For the disc audio language. · Subtitle : For the disc subtitles. · DivX Subtitle : For the DivX subtitle language by region. Western Central Cyrillic Greek Afrikaans, Basque, Catalan, Danish, Dutch, English, Faeroese, Finnish, French, German, Icelandic, Indonesian, Italian, Malay, Norwegian, Portuguese, Spanish, Swahili, Swedish English, Albanian, Croatian, Czech, Hungarian, Polish, Romanian, Serbian(Latin), Slovak, Slovenian English, Azeri, Belarusian, Bulgarian, Kazakh, Macedonian, Russian, Serbian, Tatar, Ukrainian, Uzbek English, Greek

· Disc Menu : For the disc menu contained on the disc · Menu : For the on-screen menu of your Blu-ray Home Cinema. 5. Press the buttons to select the desired language, then press the ENTER button.

M
36

Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu. The selected language will only appear if it is supported on the disc. If the subtitle language is displayed in broken fonts, change DivX Subtitle to the appropriate region. If is still does not work, the format is not supported.


========36========

Audio setup
SETTING UP THE SPEAKER OPTIONS
Dynamic Compression
This is only active when a Dolby Digital signal is detected. · On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud. · Off : You can enjoy the movie with the standard Dynamic Range.
Music System Photo
DVD

ENG
AUDIO SETUP

Language Audio Display HDMI Network Parental


Setup

Dynamic Compression : On On Off AV Sync : 50msec Test Tone Speaker Distance Sound Edit



AV Sync
Video may look slower than the audio when the player is
Music

connected to a digital TV. If this occurs, adjust the audio delay time to match the video. · You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
DVD

System Photo Setup Language Audio Display HDMI Network Parental


Dynamic Compression : On AV Sync Test Tone Speaker Distance Sound Edit : 50msec 0msec 25msec 50msec 75msec 100msec 125msec

Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
Music

1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the ENTER or button. 3. Press the buttons to select Audio, then press the ENTER or button. · Audio setup menu will be displayed. 4. Press the buttons to select Test Tone, then press the ENTER or button. 5. Press the RED(A) button · A test tone will be sent to L R LFE in order so you can make sure the speakers are set up correctly. 6. To end the test tone, press the RED (A) button again.
DVD DVD

System Photo Setup Language Audio Display HDMI Network Parental


Dynamic Compression : On AV Sync Test Tone Speaker Distance Sound Edit : 50msec



Music System Photo Setup Language Audio Display HDMI Network Parental


Dynamic Compression : On AV Sync Test Tone Speaker Distance Sound Edit : 50msec


M

Press the RETURN button to return to the previous menu.

When playing a BD/DVD or CD, this will work only in Stop mode. Use this function to check that each speaker is correctly connected and that there is no
problem.

When HDMI AUDIO is on (audio is produced through TV speakers), the TEST TONE function is
not available.

37


========37========

Audio setup
SETTING UP THE SPEAKER OPTIONS
Setting the Speaker Distance
If the location of the unit is different from the listening position, you can adjust the delay time of the audio signals from the unit's speakers and the subwoofer. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the ENTER or button. 3. Press the buttons to select Audio, then press the ENTER or button.
· Audio setup menu will be displayed.
DVD

Music System Photo Setup Language Audio Display HDMI Network Parental


Dynamic Compression : On AV Sync Test Tone Speaker Distance Sound Edit : 50msec



4. Press the buttons to select Speaker Distance, then press the ENTER or button. 5. Press the buttons to select the desired Speaker, then press the buttons to set the Speaker Distance.
· You can set the Speaker Distance between 0.3m and 9m.
DVD

Dynamic Compression : On
Music System Photo Setup Language Audio Display HDMI Network Parental


AV Sync Test Tone Speaker Distance Sound Edit

: 50msec



6. When done, use the buttons to select Save, then press the ENTER button. If you don't want to save your settings, use the buttons to select Cancel, then press the ENTER button.

M

Press the RETURN button to return to the previous menu.

Setting the Sound Edit
You can adjust the balance and level for each speaker. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the ENTER or button. 3. Press the buttons to select Audio, then press the ENTER or button.
· Audio setup menu will be displayed.

Music System Photo
DVD

Language Audio Display HDMI Network Parental


Setup

Dynamic Compression : On AV Sync Test Tone Speaker Distance Sound Edit : 50msec



38


========38========

Setting the Sound Edit
4. Press the buttons to select Sound Edit, then press the ENTER or button. 5. Press the buttons to select the desired Speaker, then press the button to adjust the settings. 6. When done, use the buttons to select Save, then press the ENTER button. If you don't want to save your settings, use the buttons to select Cancel, then press the ENTER button.
DVD

ENG

AV Sync
Music System Photo Setup Language Audio Display HDMI Network Parental


: 50msec

Test Tone Speaker Distance Sound Edit


AUDIO SETUP

M

Press the RETURN butt on to return to the previous menu.

Adjusting Front Speaker Balance · You can select between 0, -6, and OFF. · The volume decreases as you move closer to ­6. Adjusting Subwoofer Speaker Level · The volume level can be adjusted in steps from +6dB to -6dB. · The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

V-SOUND (Virtual Sound)
Produces realistic sound through 2.1 channel audio system with the aid of virtual effects, this gives you the feeling you are listening to 5.1 channel audio system. Press the V-SOUND button. · Each time the button is pressed, the selection changes as follows : V.SOUND ON ¨ V.SOUND OFF

M

Only the multi-channel is supported.

DSP Function
Press the DSP button. · Each time the button is pressed, the selection changes as follows: SMART SOUND ¨ AUDIO UPSCALING ¨ POWER BASS ¨ DSP MODE OFF · SMART SOUND : This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition. · AUDIO UPSCALING : This also helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound(24 kHz, 8bit) to CD level sound(44.1 kHz, 16bit). · POWER BASS : The POWER BASS function boosts the bass for more powerful sound.

39


========39========

Display setup
SETTING UP THE DISPLAY OPTIONS
This function allows you to setup the TV screen settings. This function depends on the disc or TV type. It may not work with some discs or TVs. 1. With the unit in Stop mode, press the MENU button. 2. Press the buttons to select Setup, then press the ENTER or button. 3. Press the buttons to select Display, then press the ENTER or button. Video setup menu will be displayed. 4. Press the buttons to select the desired display option from the options on the following pages. 5. Press the buttons to select the desired sub-menu item from a video display option, then press the ENTER button. 6. Each video option is described in detail below.
Music Photo
DVD DVD

System Music Photo Setup


Language Audio Display HDMI Network Parental


System Language Audio Display HDMI Network Parental


Setup

TV Aspect

: 16:9 Normal



Movie Frame (24 Fs) : Off Resolution Progressive Mode Still Mode Screen Message : 1080p : Auto : Auto : On

M

Press the RETURN or button to return to the previous menu. Press the MENU button to exit the menu.

Light Effect

: In Standby

TV Aspect
You may want to adjust the screen setting, depending on the type of television you have. (aspect ratio) · 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen a Blu-ray Disc/DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. · 4:3 Pan-Scan : Select when you want to see the 16:9 video supplied by the Blu-ray Disc/DVD without the black bars on top and bottom, even though you have a TV with a 4:3 ratio screen(extreme left and right portion of the movie picture will be cut off). · 16:9 Wide : You can view the full 16:9 picture on your widescreen TV.
System Music Photo
DVD

Language Audio Display HDMI Network Parental


Setup

TV Aspect

: 16:94:3 Normal Letter Box Movie Frame (24 Fs) : Off 4:3 Pan-Scan 16:9 Wide Resolution : 1080p 16:9 Normal Progressive Mode : Auto Still Mode Screen Message : Auto : On



Light Effect

: In Standby

· 16:9 Normal : Certain movies(4:3 source) will be displayed in 4:3 Pillarbox (black bars on sides of picture) if 16:9 normal is selected.

M

Some aspect ratios may not be available, depending on the disc type. the picture might appear to be distorted.

If you select an aspect ratio which is different than the aspect ratio of your TV screen, then

40


========40========

Movie Frame (24 Fs)
Movies are usually filmed at 24 frames per second. Some Blu-ray Discs have the capability of playing back at this frame rate. Setting the Movie Frame (24Fs) feature to ON allows you to adjust the Blu-ray Home Cinema's HDMI output to 24 frames per second for improved picture quality. You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. This menu can only be selected in 1080i or 1080p HDMI output resolution modes. Two types of frame rates may be included, depending on the disc: Movie material (24 frame) and Video material (30 frame). When the setting switches between Movie (24 frame) and Video (30 frame), the scree

For more information, please download the instructions above.

Category Home theater
Full name SAMSUNG HT BD8200
Model HT BD 8200
Size of file 6643 KB
Number of pages 90 pages
format file is in pdf
Language(s) Home theater SAMSUNG HT BD8200 English English