Download manual or user guide for the product:
SIEMENS WT 46S514 DN - Clothes dryer


On this page you can get: Clothes dryer SIEMENS WT 46S514 DN manual - is available for free download. All information such as file size, preview picture, category manual, model and more, you can find below.

After downloading the file, save it in safe place for example in "My documents" or "Desktop" folder. Pdf file can be able to view any time also in "offline state" (without internet connection).
We hope, that this document of instructions for use will help you.
PDF Download manual now - for free Clothes dryer SIEMENS WT 46S514 DN
Click to preview
Clothes dryer SIEMENS WT 46S514 DN Clothes dryer SIEMENS WT 46S514 DN

If this file was helpful.
Please click here:


Size of file: 2569 KB (format file is in: pdf)
Preview instructions for use
Your new dryer
Intended use
Preparing for installation, see page 8
Drying
Congratulations! - You have chosen a modern, high-quality domestic appliance from Siemens.
A distinctive feature of the condensation dryer is its low energy consumption.
Every dryer which leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
Should you have any questions, our after-sales service will be pleased to help.
п only for domestic use.
п only to be used for drying, refreshing or unwrinkling
fabrics that have been washed with water.
.
Do not leave children unsupervised near the dryer.
Keep pets away from the dryer.
Never operate the dryer if it is damaged. Inform your after-sales service.
Inspecting the dryer
Emptying condensation
Empty the container after each drying cycle, not during drying! 1. Remove the container, holding it level.
2. Pour out condensation.
3. Push the M container back in until it clicks into place.
Only if your hands are dry. Only hold the plug by the plug casing.
Connecting the
mains plug
Environmentally-responsible disposal
Dispose of packaging in an environmentally-responsible manner. This appliance is designated according to European directive + 2002/96/EC which governs waste electrical and electronic equipment (WEEE).
This directive provides the framework for the EU-wide collection and reuse of used appliances.
Sorting and loading laundry Remove all objects from pockets.
Pay particular attention to cigarette lighters.
The drum must be empty before filling.
If necessary, fill the water tank for
Steam Refresh/Drying programmes 、 page 8.
See programme overview on page 7.
See also separate instructions for “basket for woollens” (depending on the model)
Selecting and adjusting the programme
Select the drying programme ...
Condensation container
Drum
Control panel
Cleaning the fluff filter
1. Open the door, remove the filter and fold open. 2. Remove the fluff (by wiping the filter with your hand). 3. Close the filter, insert it again and close the door. 4. Remove fluff from the door and the area around it.
Very dirty or blocked filters should be rinsed under warm
water, and then dried thoroughly.
Clean the filter in the water tankif it is dirty
For further information about our products, accessories, spare parts and services, please visit: www.siemens-home.com
1. Remove the condensation tank. 2. Remove the filter.
3. Clean the filter under running water.
4. Re-insert the filter and push in the condensation tank until it clicks into
place.
Contents Page п Preparation . . . . . . . . . . . . . . . . . . . . . . 2 п Setting the programmes . . . . . . . . . . . . . 2 п Drying . . . . . . . . . . . . . . . . . . . . . . . . 3/4 п Notes on laundry . . . . . . . . . . . . . . . . . . 5 п Cleaning and care . . . . . . . . . . . . . . . . . . 6 п Overview of programmes . . . . . . . . . . . . 7 п Short spin / Refresh . . . . . . . . . . . . . . 8/9 п Installation . . . . . . . . . . . . . . . . . . . . . . 10 п Frost protection / Transport. . . . . . . . . .10 п Technical data . . . . . . . . . . . . . . . . . . . 11 п Optional accessories . . . . . . . . . . . . . . .11 п What to do if... / After-sales service. . . . 12 п Safety instructions . . . . . . . . . . . . . . . .13
... and adapt to individual requirements
Water tank filling hole with filter
Programme selector
Display for max. load
capacity for selected programme
Display panel
Additional functions
1 2
Switching off the dryer Turn the programme selector to Off. Do not leave damp laundry in the dryer.
All buttons are sensitive, a light touch is enough!
Cover for steam nozzle
Removing the laundry
Press the # start button
3
The automatic Easy Iron function moves the drum at certain intervals. The load remains loose and soft for an hour (or two hours if you manually select the _ (Easy-Iron) function, depending on the model.)
Air cooler
Fluff filter
Air inlet
Programme end once { lights up in the display.
1 -24 hrs
4
ㄗ K _°C`
(Low Heat) ㄗ _ (Easy-Iron)
0, 1, 2, 3, 4 On-Off
R B
1. Open the door. The drying cycle is paused. 2. Remove or add laundry and close the door.
600-1800 ◇
(
Status indicators h""=··J··{" Service indicators S clean M container 《 water tank
Reduced temperature for delicate fabrics F, for a longer drying time; e.g. acrylic, polyamide, elastane or acetate silk.
Reduces creasing and prolongs the anti-creasing phase after the programme has finished; can be selected in one of two levels. Indicators which show the programme sequences.
Drying, Iron Dry, Cupboard Dry, End / Easy Iron.
Interrupt programme removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed. The selected programme must then be continued until it is finished.
0, 1, 2, 3
For selecting the settings. ㄗ menu
For changing all the settings in the display panel. ㄗ ≈
End of the programme after ... (depending on the programme selected, e.g. 1:54h 、 2h; Electronic start
you can always select up to the next full hour). timer
There are four buzzer volume settings: 0 (off), 1 (quiet), 2 (normal), 3 (loud), 4 (very loud). Signal
Provides protection against unintentional changes to the functions set Appliance lock
(press and hold the menu button for 5 seconds).
ThThe drying result (e.g. cupboard dry) can be increased in three stages (1 - 3) for the Fine adjustment
programmes Cottons/Coloureds, Easy-Care, Mixed and Super 40 、 presetting = 0. Drying result After one of these programmes has been finely adjusted, the setting is retained for the others.
The spin speed that was used in the washing machine; Spin speed
for more precise indication of the projected drying duration only.
1
X
Hot steam may escape during the Steam Drying / Steam Refresh programmes.
Clean the fluff filter and/or air cooler 、 page 6. Empty the condensation container.
Fill the water tank with distilled water 、 page 9.
Drying / Short spin /
Refresh
3. If required, select a new programme and additional functions.
4. Press the # start button.
2
3
Information on laundry ...
Cleaning and care
Only when switched off!
Dryer housing, control panel, air cooler, moisture sensors
Wipe with a soft, damp cloth.
Do not use harsh cleaning agents and solvents.
Remove detergent and cleaning agent residue immediately.
During drying, water may collect between the door and seal. This does not affect your
dryer's functions in any way.
Clean the protective filter 3 - 4 times a year
or if S flashes after the fluff filter has been cleaned.
Air cooler / protective filter
When cleaning, only remove the protective filter. Clean the air cooler
behind the protective filter once a year.
– Allow the dryer to cool.
– Residual water may leak out, so place an absorbent towel
underneath the maintenance door.
1. Unlock the maintenance door.
2. Open the maintenance door fully.
hand towels
Tea towels/
③I
③I
③I
Labelling of fabrics
Follow the manufacturer's care information.
G Drying at normal temperature.
F·Dry at a low temperature 、 select K _°C`Ⅲ(Low Heat) as well. H·Do not machine dry.
Terry towels
③I
③I
WT46S514DN
Table linen
I
I
③I
③I
values may differ from those
abric and size of the load.
Do not tumble-dry the following fabrics:
– Airtight fabrics (e.g. rubber-coated fabrics).
– Delicate materials (silk, curtains made from synthetic material) 、 they may crease. – Oil-stained laundry.
Drying tips
– To ensure a consistent result, sort the laundry by fabric type and drying programme. – Close zips, hooks and eyes, and do up any buttons.
Tie belts, apron strings etc. together.
– Do not overdry easy-care laundry 、 risk of creasing
Allow laundry to finish drying in the air.
– Do not iron laundry immediately after drying, fold items up and leave for a while
、 the remaining moisture will then be distributed ev enly.
– Knitted fabrics (e.g. T-shirts, jerseys) often shrink slightly the first time they are tumble-dried.
、 Do not select the Cupboard Dry Extra programme.
– Starched laundry is not always suitable for dryers 、 starch leaves behind a coating that
adversely affects the drying operation.
– When washing laundry that is to be tumble-dried afterwards, dose the fabric softener
according to the manufacturer's instructions.
– With a small load, use the Timed Program.
Tips for Short spin/refreshing
– Use your dryer for unwrinkling and refreshing fabrics.
– Short spin cycle for reducing creasing.
– Refresh cycle for eliminating odours from fabrics.
Bed linen
removable inner lining are to be
the programme has finished and
③I
③I
③I
③I
Carl-Wery Str. 34
so for subsequent drying.
Socks
81739 Munich/Germany
③I
③I
Siemens Electrogeräte GmbH
Underwear
③I
③I
③I
③I
Bathrobes
Terry
③I
Anoraks
3. Turn both locking levers towards each another.
4. Pull out the protective filter/air cooler.
Do not damage the protective filter or air cooler.
Clean with warm water only. Do not use any hard or sharp-edged
objects.
③I
Work clothing
am smooths the fabrics.
ofter, but are not dried. Remove the laundry after
ed fabric, cotton.
s, functional clothing, fleece (jackets/trousers with
made of synthetic fibres, cotton or mixed fabrics. The
the laundry to be dried, the residual moisture in the f
③I
③I
Steam freshens up the fabrics.
or woollens description.
f acrylic, or small, individual items of laundry. Al
Sportswear
Skirts/dresses
0810 / 9000463337
③I
Do not use Short spin/Refresh for the following fabrics: – Wool, leather, fabrics with metal, wooden or plastic parts. – Wax and oil jackets.
5. Clean the air cooler thoroughly.
Allow to drip dry.
6. Clean the seals.
7. Re-insert the protective filter/air cooler,
with the handle facing down.
8. Turn back both locking levers.
9. Close the maintenance door until the lock clicks into place.
Moisture sensors
The dryer is fitted with stainless steel moisture sensors. The sensors
measure the level of moisture in the laundry. After a long period of
operation, a fine layer of limescale may form on the sensors.
③I
③I
*463337*
③I
Trousers
Page 8.
Page 8.
③I
③I


see also pages 5 and 8
Shirts
③I
③I
– Sort the laundry by colour and put on separate short spin/refresh cycles to prevent the
colours from bleeding.
– These programmes do not remove stains 、 stains must be treated and removed
beforehand.
– For best results, so that the laundry will have as few creases as possible, remove each item
immediately after the programme has finished and hang on a hanger to finish drying. Pull
clothes into shape if required.
Environmental protection/energy-saving tips
– Before drying, spin the laundry thoroughly in the washing machine 、 the higher the spin
speed, the shorter the drying time will be (consumes less energy), also spin easy-care
laundry.
– Use the maximum recommended capacity, but do not exceed it
、 Page 7, “Programme overview”.
– Make sure the room is well ventilated during drying.
– Clean the fluff filter after each drying cycle 、 page 4.
– Keep the air cooler clean 、 page 6 “Cleaning and care”.
– Keep the supply of cool air unobstructed 、 Do not cover or block the cooling grill.
5
T-shirt
③I
1. Open the door and clean the moisture sensors with a damp sponge
which has a rough surface.
For whites and coloureds made of cotton or linen.
For non-iron laundry made of synthetic fibres and mix
For smoothing hard-wearing and easy-care fabrics. Ste
Further information
For freshening hard-wearing and easy-care fabrics.
Further information
For fabrics with membrane coating, waterproof fabric
dried separately).
Use with the separate basket only. See the basket f
For washing machine-safe woollens. Fabrics become s
hang it up.
For laundry that needs to be dried quickly, e.g. items
given depending on the type of fabric, composition of
For pre-dried, multi-layered delicate fabrics made o
_ ?
Do not use steel wool or abrasive materials.
_ ?
=㈨
=
Cover for steam nozzle in the drum
After lengthy operation, limescale and fluff may accumulate on the cover of the steam nozzle. Clean regularly:
max. 8 kg
=
_
_
max. 3.5 kg
_
_
max. 2.5 kg
max. 1.5 kg
max. 1.5 kg
max. 1.0 kg
max. 1.5 kg
max. 1,5 kg
max. 3 kg
max. 2 kg
max. 3 kg
· =

1. Open the door and remove the cover with a screw driver.
Clean the cover under running water.
Cupboard Dry
iron
lightly iron
do not iron
mangle
2. Push and click the protective cap back in place.

=


Iron Dry
Cupboard Dry
Cupboard Dry Extra
Iron Dry
Cupboard Dry
Cupboard Dry Extra
ime programme
Programme overview
4
6
After drying ...
Cottons/Coloureds
Easy-Care
Steam Drying
Cottons wrinkle free
Easy-Care wrinkle free
Steam Refresh
Business
Casual
Outdoor
Wool drying basket
Mixed
Super 40
T
warm
7

========1========

Steam Drying - Steam Refresh
Steam programmes for unwrinkling or refreshing
– Your dryer has unwrinkling and refreshing programmes that can be used for removing
odours and minimising creasing in dry fabrics. Steam smooths and freshens up items of
clothing.
– Sorting the laundry according to size, weight, fabric and colour is necessary.
– Only use Short spin/Refresh for fabrics with the same properties.
– During steam generation (required), additional noises may occur.
– The result of refreshing and unwrinkling may vary depending on the type of fabric, size of
the load and programme selected.
– After unwrinkling or refreshing, all fabrics must be removed immediately and hung crease-
free on a hanger or a washing line for 15 minutes.
Programmes
Please observe the treatment symbols and manufacturer's instructions on the fabrics.
Do not use Short spin/Refresh for fabrics made of wool, leather, containing metal or
wooden parts as well as wax and oil jackets!
Do not use any dryer cleaning sets!
х
Steam Drying
Easy-Care wrinkle free
Suitable for easy-care fabrics, e.g. formal shirts. Fabrics are smoothed. You can expect
optimum results if “non-iron” appears on the care label. After the programme has finished,
the items must be removed immediately and hung crease-free on a hanger or washing line
for 15 minutes. The programme is for up to 5 formal shirts.
Cottons wrinkle free
Suitable for hard-wearing cotton fabrics, e.g. bed linen, tablecloths or formal shirts. Fabrics
are smoothed. You can expect optimum results if “non-iron” appears on the care label. After
the programme has finished, the items must be removed immediately and hung crease-free
on a hanger or washing line for 15 minutes. The programme is for up to 5 formal shirts or
1 to 2 larger items.
Steam Drying - Steam Refresh
Installation
Your water tank empties automatically after the programme has finished.
Cleaning is therefore not required Filling the water tank:
Fill the dryer's water tank with distilled water before every Steam Drying - Steam Refresh cycle.
1. Move the programme selector to Steam Drying
or Steam Refresh.
The 《 symbol appears in the display.
2. Remove the condensation tank completely.
Before every Steam Drying - Steam Refresh cycle, fill the water tank with distilled water only. Do not use tap water, condensation or additives.
ē
Consumption rates
3. Fill the water tank. Use the jug supplied.
– Scope of delivery: dryer, installation and instruction manual, jug, basket for woollens
(depending on the model).
– Check dryer for transport damage.
– The dryer is heavy. Do not attempt to lift it on your own.
– Be careful to avoid sharp edges.
– Do not install in a room where there is a risk of freezing. Freezing water may cause damage.
– If in doubt, have the appliance connected by a specialist.
– Do not lift the dryer by protruding parts (e.g. the door) - risk of breakage.
1.
Setting up the dryer Remove all accessories
– The appliance plug must always be accessible. from the drum.
– Ensure that the appliance is installed on a clean, level
The drum must be empty.
and firm surface.
– Keep the cooling grille on the front of the dryer
clear.
– Keep the area around the dryer clean.
– Level the dryer using the threaded feet.
Use a spirit level.
– Do not remove the threaded feet under any
circumstances.
Technical data ē
Dimensions (DxWxH)
Weight
Max. capacity
Condensation container
Water tank
Connection voltage
Connected load
Fuse protection
Ambient temperature
Product number
Production number
The rating plate can be found on the back of the dryer.
Cottons/Couloreds 8 kg
Cupboard Dry 1400 (approx. 50 %) 131 105 3.74 3.74
If the water tank filter is dirty 、 clean the filter in the water tank. See page 4.
Do not install the dryer behind a door or sliding door, which could prevent or restrict opening of the dryer door. This will prevent children from locking themselves in and putting their lives in danger.
4. Pour the distilled water into the filling hole on the water tank,
until the 《 symbol goes out on the display panel.
Easy-Care 3.5 kg
х
Steam Refresh
Business
Suitable for refreshing suits, jackets and trousers, or dry-clean items that cannot be washed
in the washing machine 、 see the care label. The programme only refreshes f abrics and
does not clean them. After the end of the programme, the items must be removed
immediately. Programme for 1 suit or 1 to 2 smaller items.
Casual
Suitable for refreshing casual wear made of cotton or artificial fibres. Fabrics must be
suitable for dryers 、 see the care label. The programme refreshes fabric s only, and does
not clean them. After the programme has finished, the fabrics must be removed
immediately. Programme for 1 pullover, 2 pairs of trousers or formal shirts.
If drying the recommended load, approximately 250 to 300 ml of distilled water is used in the Steam Drying - Steam Refresh programmes.
5. Insert the condensation container all the way.
Clean and level
Make sure that the air inlet
remains unobstructed
Mains connection see safety information 、 page 13.
– Connect to an AC earthed socket. If in doubt, have the socket checked by a specialist.
– The mains voltage and the voltage shown on the rating plate (、 Page 11) must be the same.
– The connected load and necessary fuse protection are specified on the rating plate. 3.
Converting the installed load Note the fuse protection of the socket.
10/16 Amps
Iron Dry 1400 (approx. 50 %) 109 83 2.24 2.24
2.
Cupboard Dry 800 (approx. 40 %) 48 42 1.35 1.35
*Test programme to DIN EN 61121
**The values may differ from those given, depending on overvoltage and undervoltage, the type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and
the size of the load.
turn to Off
1 x to the right
Press and hold selection then turn 3 x to the right
Set amperage
turn to Off
ē
Drum interior light (bulb E14, 25 W)
The drum is illuminated after the door is opened or closed, and after the programme has
started. The light goes out automatically. To change the bulb 、 page 12.
6. Start the Steam Drying or Steam Refresh programme.
Feedback:
10 A
Optional accessories (order from the after-sales service using the order number)
16 A
The condensation is drained off immediately via a hose.
Frost protection / Transport
Do not operate the dryer if there is a danger of frost.
WZ Connecting kit for condensation outlet20160
WZ
Washer-dryer stack connection set 20310
The dryer can be stacked on top of a suitable washing machine of the same depth and width, to save space. The dryer must be secured to the washing machine with this connec tion set.
WZ 20310
Same as WZ 20310, but with pull-out worktop..
WZ 20290
Installation underneath the worktop
Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.
8
9
Preparation
1. Empty the condensation container 、 page 4.
2. Select any programme using the programme selector.
3. Press the # start button 、 condensation is pumped into the container. 4. Wait 5 min., and then empty the condensation container again.
5. Turn the programme selector to Off.
The water tank must not contain any distilled water. If necessary, run the Steam/Refresh programme.
10
60 x 60 x 85 cm (adjustable height)
approximately 43.5 kg 8 kg
4.0 l
approx. 0.4 l 220-240 V
max. 2800 W 10 A / 16 A 5 - 35 °C
Inside of door
These are guide values determined under standard conditions. The value on the label is achieved at the maximum heat setting.
Spin speed in rpm Drying time Energy
(residual moisture) in min.** consumption
in kWh**
10 A 16 A 10 A 16 A
1000 (approx. 60 %) 148 122 4.49 4.49 800 (approx. 70 %) 165 139 5.17 5.17
1000 (approx. 60 %) 126 100 3.44 3.44 800 (approx. 70 %) 143 117 3.86 3.86 1000 45 39 1,05 1,05
600 (approx. 50 %) 60 51 1.65 1.65
What to do if...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed after-sales service directory, or by calling one of these numbers:
– GB 0844 8928999
– IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket. ē
The # start indicator light does Mains plug plugged in?
not come on. Programme selected?
ē
The Ⅷ symbol and # start Empty the condensation container 、 page 4.
indicator light are flashing. Check the condensation outlet hose, if applicable (kink). ē
The S symbol and # start Clean the air cooler 、 page 6 “Cleaning and care”.
indicator light are flashing. Clean the fluff filter 、 page 4.
ē
The 《 symbol flashes. Is the water tank empty?
ē
The Steam Drying - Steam
Filling with distilled water 、 Page 9 .
Refresh does not start.
The filter in the water tank may have become dirty.
If so, clean the filter in the water tank 、 Page 4. ē
Dryer does not start. Has the # start button been pressed? Is the door closed?
Programme set?
Ambient temperature greater than 5 °C?
ē
Water is leaking out. Make sure the dryer is level.
Clean the air cooler seal.
ē
The door opens by itself. Push the door closed until you hear it click into place. ē
Items crease even though the Laundry load exceeded?
Steam Drying - Steam Refresh Remove articles of clothing immediately after the end of the
programme has been selected. programme, hang up and pull into shape.
ē
Drying result was not achieved Hot laundry feels damper than it actually is.
(laundry too damp). The selected programme does not suit the load. Use
another drying programme or, in addition, select the time
programme 、 page7.
Use fine adjustment for the drying result 、 page1/2.
Fine layer of limescale on the humidity sensors 、 Clean
the humidity sensors 、"page 9.
Programme cancellation, e.g. tank full, mains power supply
failure, door open or maximum drying time reached. ē
Drying time too long. Clean the fluff filter under running
water 、 page 4.
Insufficient supply of air 、 ensure that air can circulate.
Air inlet possibly blocked 、 Clear inlet 、 page 8.
Ambient temperature higher than 35 °C 、 Ventilate the
room.
ē
The humidity in the room Make sure the room is sufficiently ventilated.
increases significantly.
ē
One or more programme status Clean the filter and air cooler 、 page 4/6.
indicator lamps are flashing.
Check the installation conditions 、 page 10.
Switch off, allow to cool, switch on again and restart the
programme.
ē
The interior light (depending on Unplug the appliance plug, fold back the cover cap on the
the model) does not work. inside above the door (using a Torx 20 screwdriver) and
replace the bulb. Close the cover cap.
Safety instructions
Caution - risk of scalding.
11
Emergency – Pull the appliance plug out of the socket immediately or disconnect the fuse. ONLY use the – In rooms inside the house.
dryer...
– For drying or unwrinkling/refreshing fabrics.
The dryer must – Be used for purposes other than those described above.
NEVER...
– Be modified in terms of its technology or properties.
Hazards – The dryer must not be used by children or persons who have not been
instructed in its use.
– Do not leave children unsupervised near the dryer.
– Keep pets away from the dryer.
– Remove all objects from pockets,
and lighters in particular 、 risk of explosion.
– Do not lean or sit on the door 、 risk of tipping.
– Open the door carefully. Hot steam may escape. The clothes and drum may
be hot 、 risk of burns.
Installation – Secure loose leads or hoses, otherwise there is a risk of tripping.
– Below 0 °C there is a possibility of frost damage.
Mains – Connect the dryer according to specifications to an AC earthed socket, connection otherwise it cannot be guaranteed that the appliance is completely safe.
– The cable cross-section must be sufficient.
– Only use earth-leakage circuit breakers with the following symbol:
– The appliance plug and socket must be compatible.
– Do not use multiple plugs/connectors and/or extension cables.
– Do not touch or hold the appliance plug with wet hands
、 risk of electric shock.
– Never pull the appliance plug out of the socket by its cable.
– Do not damage the mains lead 、 risk of electric shock.
Operation – Only laundry must be loaded into the drum.
Before switching on the dryer - check the contents.
– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover,
cleaning solvent, etc.) 、 fire/explosion hazard.
– Hazard caused by dust (e.g. coal dust, flour): do not use the dryer
、 risk of explosion.
– Do not put laundry containing foamed material/rubber in the dryer 、 elastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
– Switch off the dryer once the programme has ended.
– For unwrinkling/refreshing fabrics, use distilled water only. Do not use
condensation, tap water or additives.
– Distilled/condensation water is not for drinking.
Defect – Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
– Do not use a dryer with a faulty mains lead. To prevent risks, a faulty mains
lead must only be replaced by the after-sales service.
– Before changing the bulb of the interior light make absolutely sure you have
pulled the appliance plug from the socket 、 risk of electric shock. Spare parts – Only use genuine spare parts and accessories for safety reasons. Disposal – Dryer: unplug the appliance plug, then cut the mains lead from the appliance.
Dispose of the dryer at an approved public disposal facility.
– Packaging: keep all packaging out of reach of babies and children.
、 danger of suffocation.
– All materials are environmentally safe and recyclable. Dispose of in an
environmentally-responsible manner.
13
Observe the safety instructions on page 13.
Operating
and installation instructions
en
Read these instructions before switching on the dryer.
12

========2========

Your new dryer
Intended use
Congratulations! - You have chosen a modern, high-quality domestic appliance from Siemens.
A distinctive feature of the condensation dryer is its low energy consumption.
Every dryer which leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
Should you have any questions, our after-sales service will be pleased to help.
п only for domestic use.
п only to be used for drying, refreshing or unwrinkling
fabrics that have been washed with water.
.
Do not leave children unsupervised near the dryer. Keep pets away from the dryer.
Environmentally-responsible disposal
Dispose of packaging in an environmentally-responsible manner. This appliance is designated according to European directive + 2002/96/EC which governs waste electrical and electronic equipment (WEEE).
This directive provides the framework for the EU-wide collection and reuse of used appliances.
For further information about our products, accessories, spare parts and services, please visit: www.siemens-home.com
Contents Page п Preparation . . . . . . . . . . . . . . . . . . . . . . 2 п Setting the programmes . . . . . . . . . . . . . 2 п Drying . . . . . . . . . . . . . . . . . . . . . . . . 3/4 п Notes on laundry . . . . . . . . . . . . . . . . . . 5 п Cleaning and care . . . . . . . . . . . . . . . . . . 6 п Overview of programmes . . . . . . . . . . . . 7 п Short spin / Refresh . . . . . . . . . . . . . . 8/9 п Installation . . . . . . . . . . . . . . . . . . . . . .10 п Frost protection / Transport. . . . . . . . . .10 п Technical data . . . . . . . . . . . . . . . . . . .11 п Optional accessories . . . . . . . . . . . . . . .11 п What to do if... / After-sales service. . . .12 п Safety instructions . . . . . . . . . . . . . . . .13
Programme selector
1 -24 hrs
0, 1, 2, 3, 4 On-Off
0, 1, 2, 3
Preparing for installation, see page 8
Never operate the dryer if it is damaged. Inform your after-sales service.
M
Only if your hands are dry. Only hold the plug by the plug casing.
Connecting the
mains plug
G F· H·

K _ `Ⅲ
S
Sorting and loading laundry Remove all objects from pockets.
Pay particular attention to cigarette lighters.
The drum must be empty before filling.
If necessary, fill the water tank for
Steam Refresh/Drying programmes 、 page 8.
See programme overview on page 7.
See also separate instructions for “basket for wool
the model)
Selecting and adjusting the programme
Select the drying programme ...

③I ③I ③I I ③I ③I

③I ③I ③I ③I I ③I ③I

③I ③I ③I
Display for max. load
capacity for selected programme
Display panel

... and adapt to individual requirements

Additional functions
All buttons are sensitive, a light touch is enough!
Press the #
_


③I ③I ③I ③I ③I ③I
③I ③I

③I ③I ③I ③I ③I ③I ③I ③I
ㄗ K _°C`
(Low Heat) ㄗ _ (Easy-Iron)
Reduced temperature for delicate fabrics F time; e.g. acrylic, polyamide, elastane or acetate Reduces creasing and prolongs the anti-creasing pha programme has finished; can be selected in one of t Indicators which show the programme sequences. Drying, Iron Dry, Cupboard Dry, End / Easy Iron.
{
4
_ ?
_ ?
=㈨
=
R B
=
_
_
_
_

· =

X
600-1800 ◇
For selecting the settings. ㄗ menu
For changing all the settings in the display panel. ㄗ ≈
End of the programme after ... (depending on the programme selected, e.g. 1:54h 、 2h; Electronic start
you can always select up to the next full hour). timer
There are four buzzer volume settings: 0 (off), 1 (quiet), 2 (normal), 3 (loud), 4 (very loud). Signal
Provides protection against unintentional changes to the functions set Appliance lock
(press and hold the menu button for 5 seconds).
ThThe drying result (e.g. cupboard dry) can be increased in three stages (1 - 3) for the Fine adjustment
programmes Cottons/Coloureds, Easy-Care, Mixed and Super 40 、 presetting = 0. Drying result After one of these programmes has been finely adjusted, the setting is retained for the others.
The spin speed that was used in the washing machine; Spin speed
for more precise indication of the projected drying duration only.
(
Status indicators h""=··J··{" Service indicators S clean M container 《 water tank
Clean the fluff filter and/or air cooler 、 page 6 Empty the condensation container.
Fill the water tank with distilled water 、 page 9

#



=


1
2


========3========

Drying
п п
Inspecting the dryer
Connecting the
mains plug
Sorting and loading laundry
Condensation container
+
Drum
Control panel
、 page 8.
See also separate instructions for “basket for woollens” (depending on
Selecting and adjusting the programme
Select the drying programme ...
п п п п п п п п п п п п п
... and adapt to individual requirements
1 2
Water tank filling hole with filter
All buttons are sensitive, a light touch is enough!
Cover for steam nozzle
Press the # start button
3
Air cooler
Fluff filter
Air inlet
ㄗ ㄗ ≈
ㄗ K _ `

4
ㄗ _
R B
h""=··J··{"
Reduced temperature for delicate fabrics F, for a longer drying time; e.g. acrylic, polyamide, elastane or acetate silk.
Reduces creasing and prolongs the anti-creasing phase after the programme has finished; can be selected in one of two levels. Indicators which show the programme sequences.
Drying, Iron Dry, Cupboard Dry, End / Easy Iron.
X

S M 《
、 page 6.
Drying / Short spin /
Refresh

(
、 page 9.
Emptying condensation
Empty the container after each drying cycle, not during drying! 1. Remove the container, holding it level.
2. Pour out condensation.
3. Push the M container back in until it clicks into place.
G F· H·

K _ `Ⅲ
Cleaning the fluff filter
1. Open the door, remove the filter and fold open.
2. Remove the fluff (by wiping the filter with your hand).
3. Close the filter, insert it again and close the door.
4. Remove fluff from the door and the area around it.
Very dirty or blocked filters should be rinsed under warm
water, and then dried thoroughly.
Clean the filter in the water tankif it is dirty 1. Remove the condensation tank.
2. Remove the filter.
3. Clean the filter under running water.
4. Re-insert the filter and push in the condensation tank until it clicks into
place.
S

③I ③I ③I I ③I ③I

③I ③I ③I ③I I ③I ③I

Switching off the dryer Turn the programme selector to Off. Do not leave damp laundry in the dryer.

③I ③I ③I

Removing the laundry
The automatic Easy Iron function moves the drum at certain intervals. The load remains loose and soft for an hour (or two hours if you manually select the _ (Easy-Iron) function, depending on the model.)


③I ③I ③I ③I ③I ③I
③I ③I

③I ③I ③I ③I ③I ③I ③I ③I
Programme end once { lights up in the display.
Interrupt programme removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed. The selected programme must then be continued until it is finished.
_ ?
_ ?
=㈨
=
=
_
_
_
_

· =

Hot steam may escape during the Steam Drying / Steam Refresh programmes.
1. Open the door. The drying cycle is paused.
2. Remove or add laundry and close the door.
3. If required, select a new programme and additional functions. 4. Press the # start button.




=


3
4


========4========

Information on laundry ...
п п
M
Labelling of fabrics
Follow the manufacturer's care information.
G Drying at normal temperature.
F·Dry at a low temperature 、 select K _°C`Ⅲ(Low Heat) as well. H·Do not machine dry.
+

п п п п п п п п п п п п п
1 2
#
3
Do not tumble-dry the following fabrics:
– Airtight fabrics (e.g. rubber-coated fabrics).
– Delicate materials (silk, curtains made from synthetic material) 、 they may crease. – Oil-stained laundry.
Drying tips
– To ensure a consistent result, sort the laundry by fabric type and drying programme. – Close zips, hooks and eyes, and do up any buttons.
Tie belts, apron strings etc. together.
– Do not overdry easy-care laundry 、 risk of creasing
Allow laundry to finish drying in the air.
– Do not iron laundry immediately after drying, fold items up and leave for a while
、 the remaining moisture will then be distributed ev enly.
– Knitted fabrics (e.g. T-shirts, jerseys) often shrink slightly the first time they are tumble-dried.
、 Do not select the Cupboard Dry Extra programme.
– Starched laundry is not always suitable for dryers 、 starch leaves behind a coating that adversely affects the drying operation.
– When washing laundry that is to be tumble-dried afterwards, dose the fabric softener according to the manufacturer's instructions.
– With a small load, use the Timed Program.
Tips for Short spin/refreshing
– Use your dryer for unwrinkling and refreshing fabrics.
– Short spin cycle for reducing creasing.
– Refresh cycle for eliminating odours from fabrics.
_
Do not use Short spin/Refresh for the following fabrics: – Wool, leather, fabrics with metal, wooden or plastic parts. – Wax and oil jackets.
ㄗ ㄗ ≈
ㄗ K _ `
F
{

4
ㄗ _
R B
h""=··J··{"
X

(
S M 《



#
– Sort the laundry by colour and put on separate short spin/refresh cycles to prevent the colours from bleeding.
– These programmes do not remove stains 、 stains must be treated and removed beforehand.
– For best results, so that the laundry will have as few creases as possible, remove each item immediately after the programme has finished and hang on a hanger to finish drying. Pull clothes into shape if required.
Environmental protection/energy-saving tips
– Before drying, spin the laundry thoroughly in the washing machine 、 the higher the spin
speed, the shorter the drying time will be (consumes less energy), also spin easy-care
laundry.
– Use the maximum recommended capacity, but do not exceed it
、 Page 7, “Programme overview”.
– Make sure the room is well ventilated during drying.
– Clean the fluff filter after each drying cycle 、 page 4.
– Keep the air cooler clean 、 page 6 “Cleaning and care”.
– Keep the supply of cool air unobstructed 、 Do not cover or block the cooling grill.
Cleaning and care
Only when switched off!
Dryer housing, control panel, air cooler, moisture sensors
Wipe with a soft, damp cloth.
Do not use harsh cleaning agents and solvents.
Remove detergent and cleaning agent residue immediately.
During drying, water may collect between the door and seal. This does not affect your
dryer's functions in any way.
Clean the protective filter 3 - 4 times a year
or if S flashes after the fluff filter has been cleaned.
Air cooler / protective filter
When cleaning, only remove the protective filter. Clean the air cooler
behind the protective filter once a year.
– Allow the dryer to cool.
– Residual water may leak out, so place an absorbent towel
underneath the maintenance door.
1. Unlock the maintenance door.
2. Open the maintenance door fully.
③I ③I ③I I ③I ③I
③I ③I ③I ③I I ③I ③I
3. Turn both locking levers towards each another.
4. Pull out the protective filter/air cooler.
Do not damage the protective filter or air cooler.
Clean with warm water only. Do not use any hard or sharp-edged
objects.
③I ③I ③I
5. Clean the air cooler thoroughly.
Allow to drip dry.
6. Clean the seals.
7. Re-insert the protective filter/air cooler,
with the handle facing down.
8. Turn back both locking levers.
9. Close the maintenance door until the lock clicks into place.
Moisture sensors
The dryer is fitted with stainless steel moisture sensors. The sensors
measure the level of moisture in the laundry. After a long period of
operation, a fine layer of limescale may form on the sensors.


③I ③I ③I ③I ③I ③I
③I ③I
③I ③I ③I ③I ③I ③I ③I ③I
1. Open the door and clean the moisture sensors with a damp sponge
which has a rough surface.
_ ?
Do not use steel wool or abrasive materials.
_ ?
=㈨
=
Cover for steam nozzle in the drum
After lengthy operation, limescale and fluff may accumulate on the cover of the steam nozzle. Clean regularly:
=
_
_
_
_
· =

1. Open the door and remove the cover with a screw driver.
Clean the cover under running water.
2. Push and click the protective cap back in place.

=


5
6

========5========

hand towels
Tea towels/
③I
③I
③I
п п
M
Terry towels
③I
③I
WT46S514DN
G F· H·

K _ `Ⅲ
Table linen
I
I
③I
③I
ric and size of the load.
alues may differ from those
S
Bed linen
removable inner lining are to be
subsequent drying.
the programme has finished and
③I
③I
③I
③I
Carl-Wery Str. 34
+

Socks
81739 Munich/Germany
③I
③I
Siemens Electrogeräte GmbH
Underwear

③I
③I
③I
③I

Bathrobes
Terry
③I
1 2

Anoraks

③I
п п п п п п п п п п п п п

Work clothing
ade of synthetic fibres, cotton or mixed fabrics. The v
d fabric, cotton.
am smooths the fabrics.
ofter, but are not dried. Remove the laundry after
s, functional clothing, fleece (jackets/trousers with
the laundry to be dried, the residual moisture in the fab
crylic, or small, individual items of laundry. Also for
③I
③I
Steam freshens up the fabrics.
or woollens description.
Sportswear
③I
③I
Skirts/dresses
0810 / 9000463337
*463337*
③I
③I
#
3
_
Trousers
Page 8.
Page 8.
③I
③I


see also pages 5 and 8
Shirts
③I
③I
T-shirt
ㄗ ㄗ ≈

③I
{
For whites and coloureds made of cotton or linen.
For non-iron laundry made of synthetic fibres and mixe
For smoothing hard-wearing and easy-care fabrics. Ste
Further information
For freshening hard-wearing and easy-care fabrics.
Further information
For fabrics with membrane coating, waterproof fabric
dried separately).
Use with the separate basket only. See the basket f
For washing machine-safe woollens. Fabrics become s
hang it up.
For laundry that needs to be dried quickly, e.g. items m
given depending on the type of fabric, composition of
For pre-dried, multi-layered delicate fabrics made of a
ㄗ K _ `
F

4
_ ?
_ ?
ㄗ _
=㈨
=
R B
max. 8 kg
=
_
_
max. 3.5 kg
_
_
max. 2.5 kg
max. 1.5 kg
max. 1.5 kg
max. 1.0 kg
max. 1.5 kg
max. 1,5 kg
max. 3 kg
max. 2 kg
max. 3 kg
h""=··J··{"

· =

X



Cupboard Dry

(
S M 《

iron
lightly iron
do not iron
mangle
#



=


Iron Dry
Cupboard Dry
Cupboard Dry Extra
Iron Dry
Cupboard Dry
Cupboard Dry Extra
ime programme

Programme overview
After drying ...
Cottons/Coloureds
Easy-Care
Steam Drying
Cottons wrinkle free
Easy-Care wrinkle free
Steam Refresh
Business
Casual
Outdoor
Wool drying basket
Mixed
Super 40
T
warm
7

========6========

Steam Drying - Steam Refresh
Steam programmes for unwrinkling or refreshing
– Your dryer has unwrinkling and refreshing programmes that can be used for removing
odours and minimising creasing in dry fabrics. Steam smooths and freshens up items of
clothing.
– Sorting the laundry according to size, weight, fabric and colour is necessary.
– Only use Short spin/Refresh for fabrics with the same properties.
– During steam generation (required), additional noises may occur.
– The result of refreshing and unwrinkling may vary depending on the type of fabric, size of
the load and programme selected.
– After unwrinkling or refreshing, all fabrics must be removed immediately and hung crease-
free on a hanger or a washing line for 15 minutes.
Programmes
Please observe the treatment symbols and manufacturer's instructions on the fabrics.
Do not use Short spin/Refresh for fabrics made of wool, leather, containing metal or
wooden parts as well as wax and oil jackets!
Do not use any dryer cleaning sets!
х
Steam Drying
Easy-Care wrinkle free
Suitable for easy-care fabrics, e.g. formal shirts. Fabrics are smoothed. You can expect
optimum results if “non-iron” appears on the care label. After the programme has finished,
the items must be removed immediately and hung crease-free on a hanger or washing line
for 15 minutes. The programme is for up to 5 formal shirts.
Cottons wrinkle free
Suitable for hard-wearing cotton fabrics, e.g. bed linen, tablecloths or formal shirts. Fabrics
are smoothed. You can expect optimum results if “non-iron” appears on the care label. After
the programme has finished, the items must be removed immediately and hung crease-free
on a hanger or washing line for 15 minutes. The programme is for up to 5 formal shirts or
1 to 2 larger items.
Steam Drying - Steam Refresh
Your water tank empties automatically after the programme has finished.
Cleaning is therefore not required Filling the water tank:
Fill the dryer's water tank with distilled water before every Steam Drying - Steam Refresh cycle.
ē
1. Move the programme selector to Steam Drying
or Steam Refresh.
The 《 symbol appears in the display.
ē ē ē ē ē ē
#

#



2. Remove the condensation tank completely.
S
#
ē
、 、

Before every Steam Drying - Steam Refresh cycle, fill the water tank with distilled water only. Do not use tap water, condensation or additives.


3. Fill the water tank. Use the jug supplied.

#
If the water tank filter is dirty 、 clean the filter in the water tank. See page 4.
4. Pour the distilled water into the filling hole on the water tank,
until the 《 symbol goes out on the display panel.
ē ē ē




ē
х
Steam Refresh
Business
Suitable for refreshing suits, jackets and trousers, or dry-clean items that cannot be washed
in the washing machine 、 see the care label. The programme only refreshes f abrics and
does not clean them. After the end of the programme, the items must be removed
immediately. Programme for 1 suit or 1 to 2 smaller items.
Casual
Suitable for refreshing casual wear made of cotton or artificial fibres. Fabrics must be
suitable for dryers 、 see the care label. The programme refreshes fabric s only, and does
not clean them. After the programme has finished, the fabrics must be removed
immediately. Programme for 1 pullover, 2 pairs of trousers or formal shirts.
If drying the recommended load, approximately 250 to 300 ml of distilled water is used in the Steam Drying - Steam Refresh programmes.


5. Insert the condensation container all the way.



、"

ē

ē

6. Start the Steam Drying or Steam Refresh programme.

、 、

ē ē




ē
#


8
9

========7========

Installation

х
– Scope of delivery: dryer, installation and instruction manual, jug, basket for woollens
(depending on the model).
– Check dryer for transport damage.
– The dryer is heavy. Do not attempt to lift it on your own.
– Be careful to avoid sharp edges.
– Do not install in a room where there is a risk of freezing. Freezing water may cause damage.
– If in doubt, have the appliance connected by a specialist.
– Do not lift the dryer by protruding parts (e.g. the door) - risk of breakage.
1.
Setting up the dryer Remove all accessories
– The appliance plug must always be accessible. from the drum.
– Ensure that the appliance is installed on a clean, level
The drum must be empty.
and firm surface.
– Keep the cooling grille on the front of the dryer
clear.
– Keep the area around the dryer clean.
– Level the dryer using the threaded feet.
Use a spirit level.
– Do not remove the threaded feet under any
circumstances.

Do not install the dryer behind a door or sliding door, which could prevent or restrict opening of the dryer door. This will prevent children from locking themselves in and putting their lives in danger.

2.
х
Clean and level
Make sure that the air inlet
remains unobstructed
Mains connection see safety information 、 page 13.
– Connect to an AC earthed socket. If in doubt, have the socket checked by a specialist.
– The mains voltage and the voltage shown on the rating plate (、 Page 11) must be the same.
– The connected load and necessary fuse protection are specified on the rating plate. 3.
Converting the installed load Note the fuse protection of the socket.
10/16 Amps

turn to Off
1 x to the right
Press and hold selection then turn 3 x to the right
Set amperage
turn to Off

Feedback:
10 A
16 A
Frost protection / Transport
Do not operate the dryer if there is a danger of frost.
Preparation
1. Empty the condensation container 、 page 4.
2. Select any programme using the programme selector.
3. Press the # start button 、 condensation is pumped into the container. 4. Wait 5 min., and then empty the condensation container again.
5. Turn the programme selector to Off.
The water tank must not contain any distilled water. If necessary, run the Steam/Refresh programme.
10
Technical data
ē
Dimensions (DxWxH) 60 x 60 x 85 cm (adjustable height)
Weight approximately 43.5 kg
Max. capacity 8 kg
Condensation container 4.0 l
Water tank approx. 0.4 l
Connection voltage 220-240 V
Connected load max. 2800 W
Fuse protection 10 A / 16 A
Ambient temperature 5 - 35 °C
Product number
Production number
Inside of door
The rating plate can be found on the back of the dryer.
ē
Consumption rates These are guide values determined under standard
conditions. The value on the label is achieved at the
maximum heat setting.
Spin speed in rpm Drying time Energy
(residual moisture) in min.** consumption
in kWh**
Cottons/Couloreds 8 kg 10 A 16 A 10 A 16 A
Cupboard Dry 1400 (approx. 50 %) 131 105 3.74 3.74
1000 (approx. 60 %) 148 122 4.49 4.49
800 (approx. 70 %) 165 139 5.17 5.17
Iron Dry 1400 (approx. 50 %) 109 83 2.24 2.24
1000 (approx. 60 %) 126 100 3.44 3.44
800 (approx. 70 %) 143 117 3.86 3.86
Easy-Care 3.5 kg 1000 45 39 1,05 1,05
Cupboard Dry 800 (approx. 40 %) 48 42 1.35 1.35
600 (approx. 50 %) 60 51 1.65 1.65
*Test programme to DIN EN 61121
**The values may differ from those given, depending on overvoltage and undervoltage, the
type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and
the size of the load.
ē
Drum interior light (bulb E14, 25 W)
The drum is illuminated after the door is opened or closed, and after the programme has
started. The light goes out automatically. To change the bulb 、 page 12.
Optional accessories (order from the after-sales service using the order number) WZ Connecting kit for condensation outlet20160
The condensation is drained off immediately via a hose.
WZ
Washer-dryer stack connection set
20310
The dryer can be stacked on top of a suitable washing machine of the same depth and width,
to save space. The dryer must be secured to the washing machine with this connectio n set. WZ
20310 Same as WZ 20310, but with pull-out worktop..
ē ē ē ē ē ē
#

#



S
#
、 、




#
ē ē ē


ē





、"

ē


、 、

ē ē



WZ 20290
Installation underneath the worktop
Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.
ē

11

========8========

ē

1.
ē
х


2.


х
3.

ē


Do not operate the dryer if there

#

What to do if...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed after-sales service directory, or by calling one of these numbers:
– GB 0844 8928999
– IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket. ē
The # start indicator light does Mains plug plugged in?
not come on. Programme selected?
ē
The Ⅷ symbol and # start Empty the condensation container 、 page 4.
indicator light are flashing. Check the condensation outlet hose, if applicable (kink). ē
The S symbol and # start Clean the air cooler 、 page 6 “Cleaning and care”.
indicator light are flashing. Clean the fluff filter 、 page 4.
ē
The 《 symbol flashes. Is the water tank empty?
ē
The Steam Drying - Steam
Filling with distilled water 、 Page 9 .
Refresh does not start.
The filter in the water tank may have become dirty.
If so, clean the filter in the water tank 、 Page 4. ē
Dryer does not start. Has the # start button been pressed? Is the door closed?
Programme set?
Ambient temperature greater than 5 °C?
ē
Water is leaking out. Make sure the dryer is level.
Clean the air cooler seal.
ē
The door opens by itself. Push the door closed until you hear it click into place. ē
Items crease even though the Laundry load exceeded?
Steam Drying - Steam Refresh Remove articles of clothing immediately after the end of the
programme has been selected. programme, hang up and pull into shape.
ē
Drying result was not achieved Hot laundry feels damper than it actually is.
(laundry too damp). The selected programme does not suit the load. Use
another drying programme or, in addition, select the time
programme 、 page7.
Use fine adjustment for the drying result 、 page1/2.
Fine layer of limescale on the humidity sensors 、 Clean
the humidity sensors 、"page 9.
Programme cancellation, e.g. tank full, mains power supply
failure, door open or maximum drying time reached. ē
Drying time too long. Clean the fluff filter under running
water 、 page 4.
Insufficient supply of air 、 ensure that air can circulate.
Air inlet possibly blocked 、 Clear inlet 、 page 8.
Ambient temperature higher than 35 °C 、 Ventilate the
room.
ē
The humidity in the room Make sure the room is sufficiently ventilated.
increases significantly.
ē
One or more programme status Clean the filter and air cooler 、 page 4/6.
indicator lamps are flashing.
Check the installation conditions 、 page 10.
Switch off, allow to cool, switch on again and restart the
programme.
ē
The interior light (depending on Unplug the appliance plug, fold back the cover cap on the
the model) does not work. inside above the door (using a Torx 20 screwdriver) and
replace the bulb. Close the cover cap.
12
Safety instructions
Emergency – Pull the appliance plug out of the socket immediately or disconnect the fuse. ONLY use the – In rooms inside the house.
dryer...
– For drying or unwrinkling/refreshing fabrics.
The dryer must – Be used for purposes other than those described above.
NEVER...
– Be modified in terms of its technology or properties.
Hazards – The dryer must not be used by children or persons who have not been
instructed in its use.
– Do not leave children unsupervised near the dryer.
– Keep pets away from the dryer.
– Remove all objects from pockets,
and lighters in particular 、 risk of explosion.
– Do not lean or sit on the door 、 risk of tipping.
– Open the door carefully. Hot steam may escape. The clothes and drum may
be hot 、 risk of burns.
Installation – Secure loose leads or hoses, otherwise there is a risk of tripping.
– Below 0 °C there is a possibility of frost damage.
Mains – Connect the dryer according to specifications to an AC earthed socket, connection otherwise it cannot be guaranteed that the appliance is completely safe.
– The cable cross-section must be sufficient.
– Only use earth-leakage circuit breakers with the following symbol:
– The appliance plug and socket must be compatible.
– Do not use multiple plugs/connectors and/or extension cables.
– Do not touch or hold the appliance plug with wet hands
、 risk of electric shock.
– Never pull the appliance plug out of the socket by its cable.
– Do not damage the mains lead 、 risk of electric shock.
Operation – Only laundry must be loaded into the drum.
Before switching on the dryer - check the contents.
– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover,
cleaning solvent, etc.) 、 fire/explosion hazard.
– Hazard caused by dust (e.g. coal dust, flour): do not use the dryer
、 risk of explosion.
– Do not put laundry containing foamed material/rubber in the dryer 、 elastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
– Switch off the dryer once the programme has ended.
– For unwrinkling/refreshing fabrics, use distilled water only. Do not use
condensation, tap water or additives.
– Distilled/condensation water is not for drinking.
Defect – Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
– Do not use a dryer with a faulty mains lead. To prevent risks, a faulty mains
lead must only be replaced by the after-sales service.
– Before changing the bulb of the interior light make absolutely sure you have
pulled the appliance plug from the socket 、 risk of electric shock. Spare parts – Only use genuine spare parts and accessories for safety reasons. Disposal – Dryer: unplug the appliance plug, then cut the mains lead from the appliance.
Dispose of the dryer at an approved public disposal facility.
– Packaging: keep all packaging out of reach of babies and children.
、 danger of suffocation.
– All materials are environmentally safe and recyclable. Dispose of in an
environmentally-responsible manner.
13

========9========

ē

1.


ē
、 、

Observe the safety instructions on page 13.


х
ē ē ē ē ē ē
#

#

S
#

#

ē ē ē



2.


ē
х
3.





、"


ē

ē



、 、

Operating
and installation instructions
en
Do not operate the dryer if there
ē ē



Caution - risk of scalding.

ē
#


Read these instructions before switching on the dryer.

========10========



For more information, please download the instructions above.

Category Clothes dryer
Full name SIEMENS WT 46S514 DN
Model WT 46 S 514 DN
Size of file 2569 KB
Number of pages 10 pages
format file is in pdf
Language(s) Clothes dryer SIEMENS WT 46S514 DN English English